Network Splitter PLANET POE-175-95 Power over Ethernet Black

The POE-175-95 is a single-port IEEE 802.3bt Power over Ethernet injector that delivers up to 95 watts of DC power over standard Cat5e/Cat6 Ethernet cabling while simultaneously carrying data. It integrates an internal 100–240 V AC power supply in a compact housing and provides one Ethernet input and one Ethernet+DC output for powering high-power network devices.

Advantages

The POE-175-95 supplies up to 95 W over all four pairs of twisted-pair cable, enabling support for higher-power devices while remaining backward compatible with 802.3af/at equipment. Built-in LED indicators show real-time PoE power usage and link status, and the unit’s plug-and-play design with an internal power supply allows quick installation without software configuration. The compact form factor and standard RJ45 interfaces simplify deployment and reduce the need for separate AC outlets near powered devices.

Suitable for

• PTZ speed-dome and other high-power IP cameras
• All-in-one touch PCs and digital signage displays
• Wireless access points and other network devices requiring up to 95 W
• Remote installations where AC outlets are unavailable

Key specifications

• Standard: IEEE 802.3bt (backward compatible with 802.3af/at)
• Maximum PoE output: 95 W
• Output voltage: 54 V DC
• Port configuration: 1 x Ethernet input (RJ45), 1 x Ethernet+DC output (RJ45)
• Data rate: 10/100/1000Base-T(X) over Cat5e/Cat6
• AC input: 100–240 V
• Dimensions: 170 mm x 100 mm x 40 mm

How to use

Connect the AC power cord to the POE-175-95 and plug the Ethernet cable from your switch or router into the Ethernet input port. Run a Cat5e/6 cable from the Ethernet+DC output port to the powered device (PD). The injector will automatically negotiate power and deliver data and up to 95 W DC to a compatible 802.3bt PD. Monitor the front-panel LEDs to verify power usage and link status during operation.

Recommendations

Use Cat5e or Cat6 cabling and keep each cable run within 100 meters to maintain reliable data and power delivery. Ensure the powered device supports IEEE 802.3bt or is compatible with higher-power PoE injectors; when using the POE-172S splitter, select the appropriate DC output (12 V / 19 V / 24 V) for the PD.