Ask a Question About This Product
ARCTIC TP-3 Premium Performance Thermal Pad 100 x 100 mm, 0.5 mm
Shipping & Returns
-90x90h.webp "Build-Your-Own Gaming PC — Ryzen 7 7700 + RTX 5070, 32GB DDR5 | DistriNode")
-90x90w.webp "DistriNode Ryzen 5 8500G Office PC (Radeon Integrated Graphics) — Build Your Own")
R19,377
Ex Tax:R16,850
Ensure the lowest thermal resistance with our award-winning thermal interfaces. Well known for its outstanding quality, our high-performance MX thermal compound is a regular winner in performance tests. It offers a very low thermal resistance due to its minimum bond line thickness and is easy to apply, even for beginners. Thermal pads in various designs and sizes round out the product range.
High Performance - very soft
Based on silicone and a special filler, TP-3 also outperforms high-performance pads, especially when height differences of closely spaced chips typically occur due to manufacturing tolerances. The TP-3 offers excellent thermal conductivity despite extremely low hardness.
Minimization of thermal resistance
The thinner the pad, the lower the termal resistance. The TP-3 pad with a thickness of 0.5 mm can easily be compressed to 0.3 mm and thus compensate for height differences between various components of up to 0.2 mm. Please note that due to the extremely low hardness, the installation of the 0.5 mm pad requires extra care. Please refer to the user manual.
Versatile Applications
Heat-conducting, vibration-damping, mouldable, electrically insulating - safe and easy to use. Thanks to its good compression properties, the soft heat conduction pad is particularly gentle on components and at the same time a good heat conductor. In addition to the standard format for M.2, the TP-3 is available in various sizes and thicknesses, which can be easily cut to the desired shape and size. This makes it ideal for RAMs, chipsets and ICs of all kinds, which are used in PCs, laptops, consoles, graphics cards and electronic devices in general.
Safe handling
The ARCTIC TP-3 is electrically insulating, non-adhesive and easy to handle. This means that optimal and safe heat transfer can be ensured in many application areas.
Bridging gaps
The TP-3 are softer than conventional pads and therefore particularly suitable for different chip heights and possible tolerances. Thanks to their good compressibility properties, the thermal pads act as the perfect gap filler and bridges uneven surface and air gaps without stressing sensitive and protruding components.
Available in different thicknesses and sizes
Our thermal pads are available in a choice of 0.5 mm, 1.0 mm and 1.5 mm. The 0.5 mm variant is ideally suited as an alternative to heat-conducting foil. The pads are available in different dimensions, depending on their thickness. If required, the pads can also be independently cut to any size.
How to use
For thermal compound, clean the contact surfaces thoroughly, apply a small amount of paste to the center of the component, then mount the heatsink and allow the compound to spread into a thin layer. For thermal pads, select the correct thickness and cut the pad to fit the contact area, then remove protective films and press firmly to ensure full contact. Follow manufacturer instructions for curing times if specified.
Recommendations
Use the MX thermal compound when minimal thermal resistance is required; choose thermal pads for quick installation or when component spacing requires fixed thickness. Store materials in a cool, dry place and replace compound or pads during major cooling system changes.
Popular products in this category
- Thermal paste Arctic MX-7 ULTIMATE Performance, 8 g, density 2.9 g/cm³, grey
- ARCTIC MX-6 ULTIMATE Performance Thermal Paste, Thermal grease, Grey, 8 g, 1 pc(s), 27 mm, 121 mm
- Cooler Thermal Paste Thermal Grizzly Thermo Pad TG-PS-50-40
- ARCTIC MX-6 ULTIMATE Performance Thermal Paste + MX Cleaner, Thermal grease, Grey, 4 g, 1 pc(s), 66 mm, 120 mm
- ARCTIC MX-7 - ULTIMATE Performance Thermal Paste, Thermal paste, 2.9 g/cm³, Grey, 35.000 - 38.000, -50 - 250 °C, 4 g
- ARCTIC MX-4 Highest Performance Thermal Compound
- Thermal paste Noctua NT-H2 heat sink compound 3.5 g — grey, operating temperature -50–200 °C, density 2.81 g/cm³, volume 1.2 ml
- ARCTIC MX-6 ULTIMATE Performance Thermal Paste, Thermal grease, Grey, 2 g, 1 pc(s), 23 mm, 152 mm
