Water Pump Einhell GC-WW 1250 NN

The Einhell GC-WW 1250 NN is a stainless steel garden water pump designed for transporting and supplying water in domestic and outdoor settings. Driven by a 1200 W motor, it provides a continuous flow rate up to 5000 l/h and can generate a maximum pressure of 5 bar. The pump is built for robustness and corrosion resistance, with a maximum delivery head of 50 m and a practical 1.5 m power cable. Weighing approximately 14.7 kg, the unit is portable enough for seasonal installation and maintenance tasks.

Advantages

The stainless steel housing and components provide increased durability and resistance to corrosion compared with non-stainless designs. A high-power 1200 W motor enables stable water delivery at flow rates up to 5000 l/h, while the 5 bar maximum pressure and 50 m delivery height extend the pump's applicability to deeper wells or elevated irrigation systems. The pump's moderate weight and integrated grab points simplify installation and repositioning.

Suitable for

• Garden irrigation and lawn watering
• Water transfer from rainwater tanks and cisterns
• Filling and emptying of ponds and pools
• Domestic water supply for outdoor taps and hose systems

Key specifications

• Motor power: 1200 W
• Maximum flow rate: 5000 l/h
• Maximum pressure: 5 bar
• Maximum delivery head: 50 m
• Construction material: stainless steel
• Weight: 14.7 kg
• Power cable length: 1.5 m

How to use

Place the pump on a stable, level surface near the water source and ensure all hose connections are secure and leak-free. Connect an appropriate suction hose to the inlet and a discharge hose to the outlet, taking care to prime the suction line if required. Connect the pump to a suitable power supply using the supplied cable, then switch the unit on following the manufacturer's safety instructions. Monitor pressure and flow during operation and switch off the pump before disconnecting hoses or performing maintenance.

Recommendations

To prolong service life, avoid running the pump dry, protect the unit from freezing temperatures, and perform periodic checks for leaks, wear, and blockages in impellers and hoses. Use suitable filters on the suction side when drawing water with visible debris. For stable long-term operation, secure all fittings and verify that the suction lift and head requirements remain within the pump's specified limits.