Eufy S1 Pro Robot Vacuum and Mop with Automatic Station (T2080GA1)

The Eufy S1 Pro is a square-shaped robot vacuum cleaner designed for combined vacuuming and wet mopping. It features a dual-water reservoir mop that spins at 170 RPM and applies about 1 kg (2.2 lb) of pressure to remove stubborn stains across a 290 mm (11.4 in.) cleaning path. The system includes an automatic base (UniClean Station) that handles emptying, washing, refilling, heated air drying and wastewater collection, and supports ozone-assisted disinfection in the clean-water tank. The robot offers up to 8,000 Pa suction power, a detangling brush, 4600 mAh battery for long runtimes, and compact dimensions for maneuverability.

Advantages

The S1 Pro combines rotary mopping with active rinsing and a 10-in-1 UniClean Station that automates emptying, washing, refilling, heated drying and detergent dosing. Its square form factor and 290 mm mop head improve access to edges and 90° corners. Strong 8,000 Pa suction and a detangling brush enable effective debris pickup on hard floors and carpets. Built-in 3D MatrixEye obstacle avoidance with dToF LiDAR and RGB camera supports fast, accurate mapping, while the see-through water tank and LCD touch control simplify operation. The base station’s Eco-Clean Ozone function generates ozonated water for enhanced disinfection when using tap water.

Suitable for

• Homes with hard floors and area rugs
• Users who want combined vacuuming and automated wet mopping
• Medium to large apartments or houses up to the robot’s coverage capacity
• Households seeking hands-off maintenance with automatic base functions

Key specifications

• Model: Eufy S1 Pro (MPN T2080GA1, EAN 194644126162)
• Suction: up to 8,000 Pa
• Mop spin speed: 170 RPM; pressure ~1 kg (2.2 lb); mop width 290 mm (11.4 in.)
• Dust container: 0.25 L dust bag; base dust capacity 2.5 L
• Battery: 4600 mAh, up to 216 minutes runtime
• Noise level: ~60 dB
• Dimensions (H×W×D): 96 × 325 × 347 mm; weight: 5.14 kg
• Wet mopping: yes; automatic base station return: yes

How to use

Place the UniClean Station on a level surface and fill the clean-water tank as instructed; tap water is recommended for the Eco-Clean Ozone function. Charge the robot fully before first use using the base station. Select a cleaning mode via the LCD touch control, then start the robot; it will map the environment using TrueCourse™ Mapping and the 3D MatrixEye sensors. For wet mopping, ensure the mop pad is correctly attached and the dual water reservoirs are filled. After cleaning, the base station will automatically empty, wash and dry the mop as needed.

Recommendations

For better disinfection results with Eco-Clean Ozone, use tap water in the clean-water tank. Laboratory tests showed up to 99.99% reduction of E. coli under controlled conditions; actual results may vary depending on environmental factors. Regularly check and replace the dust bag and follow the maintenance instructions in the user manual to preserve performance.