Ernitec 0070-06405 security camera Bullet IP security camera Indoor & outdoor 2720 x 1976 pixels Ceiling/Wall/Pole

The Ernitec 0070-06405 Bullet is an IP security camera with a 5MP 2720 × 1976 resolution sensor, designed for indoor and outdoor surveillance. It uses a 1/2.7” progressive scan CMOS, offers HDR Engine Gen3 and 3D DNR for improved image clarity, and is housed in an all-aluminium, white IP66/IK10-rated enclosure. The camera supports PoE (IEEE 802.3af), ONVIF Profile S/G/T/M and multiple codecs (H.265, H.264, MJPEG), and includes IR illumination with an effective range up to 45 m.

Advantages

The camera delivers high-resolution, clear images at up to 30 fps and handles high-contrast scenes using HDR Engine Gen3. Progressive scan CMOS and 3D digital noise reduction reduce motion blur and noise in low light. Robust mechanical protection (IP66, IK10) and an all-aluminium housing make it suitable for outdoor installations, while PoE simplifies power and network installation. ONVIF support and multi-codec compatibility enable integration with many recording systems.

Suitable for

• Perimeter and building exterior surveillance
• Indoor monitoring in commercial and public spaces
• Parking lots and loading areas with variable lighting
• Ceiling, wall or pole mounting for flexible coverage

Key specifications

• Sensor: 1/2.7” Progressive Scan CMOS
• Resolution and frame rate: 2720 × 1976 @ 30 fps (5MP)
• Lens: motorized/manual focus, 2.7–12 mm focal length
• Video codecs: H.265 / H.264 / MJPEG
• HDR: HDR Engine Gen3; Noise reduction: 3D DNR
• IR range: up to 45 m
• Network: Ethernet LAN, PoE (IEEE 802.3af)
• Standards: ONVIF Profile S/G/T/M
• Durability: All-aluminium housing, IP66, IK10
• Minimum illumination: 0.008 lx
• Frame rate: 30 fps
• Weight: 1.28 kg
• Colour: White

How to use

Mount the camera on a ceiling, wall or pole using appropriate hardware and ensure the field of view covers the intended area. Connect the camera to the network via Ethernet; PoE provides power and data over a single cable when used with a compatible switch or injector. Configure resolution, frame rate, and codec settings through the camera web interface or your VMS; enable ONVIF if integrating with third-party recorders. Use the motorized/manual focus to adjust sharpness and verify IR coverage for nighttime monitoring.

Recommendations

Install the camera under an overhang or use accessories to minimize direct rain and sun exposure on the lens. For best image quality in mixed lighting, enable HDR and adjust exposure settings in the camera menu. Use a PoE switch that meets IEEE 802.3af specifications and ensure proper surge protection for outdoor installations.