IP dome surveillance camera DAHUA IPC-HDW1430DT-SAW-0280B 4MP 2.8mm Wi‑Fi IR, IP67, MicroSD up to 256GB

The DAHUA IPC-HDW1430DT-SAW-0280B is a 4MP dome surveillance camera designed for ceiling, wall or pole mounting in indoor environments. It supports both wired Ethernet and Wi‑Fi connections, features infrared night vision up to 30 m and a 1/3" CMOS optical sensor that captures video at up to 30 fps. The compact eyeball form factor and fixed-focus lens make the camera suitable for straightforward installation and continuous monitoring of small to medium areas.

Advantages

This camera provides 4 megapixel resolution with wide dynamic range (WDR) and noise reduction for clearer image detail in scenes with varying lighting. Day/night mode and a minimum illumination of 0.003 lx improve low-light performance, while built-in infrared LEDs extend visibility to 30 m at night. Integrated audio (microphone), a microSD card slot for local storage, and both Ethernet and Wi‑Fi connectivity offer flexible deployment and recording options. The device supports automatic and manual white balance settings to adapt to different lighting conditions.

Suitable for

• Indoor monitoring of retail shops and offices
• Entrance halls and corridors
• Small warehouses and storerooms
• Residential common areas and corridors

Key specifications

• Form factor: dome (eyeball), indoor placement
• Image sensor: 1/3" CMOS, 4 MP total resolution
• Frame rate: up to 30 frames per second
• Lens: fixed focus
• Minimum illumination: 0.003 lux; day/night mode
• Wide Dynamic Range (WDR) and noise reduction enabled
• Night vision: IR illumination up to 30 m
• Pan range: 0–360° (mounting/adjustment range of eyeball design)
• White balance modes: Auto, Manual, Natural, Outdoor, Regional custom, Street lamp
• Audio: built-in microphone
• Connectivity: Ethernet LAN and Wi‑Fi
• Local storage: integrated card reader (microSD slot)
• Power: DC power input
• Weight: approximately 316.9 g

How to use

Mount the dome camera on a ceiling, wall or pole using the appropriate brackets and wiring. Connect to power via the DC input and choose wired Ethernet or Wi‑Fi for network access. Configure the camera through the DAHUA management interface or a compatible NVR/software: set resolution and frame rate, enable WDR and noise reduction if needed, and adjust white balance and day/night settings. Insert a microSD card for local recording or configure remote storage to an NVR or cloud service. Use the built-in microphone and motion detection settings to tailor alerts and recordings to your monitoring needs.

Recommendations

Install the camera at a height and angle that capture the target area clearly while avoiding direct exposure to strong light sources. For reliable night-time detection to the specified 30 m range, ensure IR LEDs are not obstructed and clean the dome cover periodically. Use wired Ethernet for the most stable network connection in environments with heavy Wi‑Fi interference.