SFP transceiver module BlueOptics IE-SFP-1GE-SM-10-BIDI-TX1550-B 1250 Mbit/s 1310 nm

The BlueOptics IE-SFP-1GE-SM-10-BIDI-TX1550-B is a single‑fiber SFP transceiver module designed for single‑mode fiber networks. It supports a maximum data rate of 1250 Mbit/s, transmits at a wavelength of 1310 nm and is built in a metal housing with an operating voltage of 3.3 V. The module is compact and lightweight (approx. 20 g) and is suitable for long‑reach optical links up to 20,000 m when used with compatible single‑mode fiber and appropriate patching.

Advantages

This SFP transceiver provides reliable single‑fiber bidirectional transmission at 1310 nm and supports standard 1.25 Gbit/s signalling for Ethernet and other protocols compatible with SFP form factor modules. The metal housing offers physical robustness and thermal stability while the small size makes it compatible with a wide range of networking equipment that accepts SFP modules. Built to industry MSA‑compatible physical specifications, the module integrates into standard SFP slots and can be used in systems that require single‑mode, long‑distance optical links.

Suitable for

Key specifications

How to use

Install the transceiver into an open SFP slot on a switch, router, media converter or other compatible equipment, ensuring the device is powered down or follows the vendor's hot‑swap guidance. Connect the single‑mode fiber patch cord to the module using the correct polarity and a matching bidirectional fiber on the far end. Configure the host device for the intended network protocol and speed; the module operates at standard SFP signalling rates and is typically recognized by equipment that supports industry‑standard SFP modules. Verify link and optical status through the host device management interface.

Recommendations

Use low‑loss single‑mode fiber and appropriate adapters or patch panels to achieve the specified link distances. Ensure connectors and fiber ends are clean before mating and observe ESD precautions when handling the module. Match the module's wavelength and fibre type to the remote transceiver (bidirectional single‑fiber pair) to avoid mismatches. For best results, monitor optical power and link status during initial deployment and consult equipment vendor compatibility lists if required.