SFP transceiver BlueOptics MGBSX1 1250 Mbit/s Fiber optic 850 nm

The BlueOptics MGBSX1 1250 Mbit/s Fiber optic 850 nm is an SFP transceiver module for short-range multimode fiber links. Designed for easy integration into switches, routers and media converters with SFP ports, this module supports data rates up to 1250 Mbit/s and transmits at an 850 nm wavelength. The compact SFP form factor allows hot‑swap replacement and flexible network upgrades without requiring equipment shutdown.

Advantages

This SFP transceiver offers a compact design and broad compatibility with standard SFP interfaces, supporting reliable short-distance fiber connections at 850 nm. It enables low-latency, full-duplex data transfer at 1250 Mbit/s and simplifies installation with plug-and-play operation. The module’s standard optical characteristics make it suitable for use in enterprise and data center links where multimode fiber is deployed.

Suitable for

Key specifications

How to use

Insert the transceiver into a compatible SFP port on your network device until it clicks into place. Connect the multimode fiber patch cable with appropriate LC connectors to the transceiver’s optical port, ensuring correct polarity. After connection, verify link status through the device management interface or LEDs and configure the network port as required for the intended link speed and duplex mode. To remove the module, disengage any retention mechanism and pull the transceiver straight out while the device is powered if the appliance supports hot‑swap.

Recommendations

Use multimode fiber with suitable core diameter and LC connectors for short-reach links and follow the host device manufacturer’s compatibility list. Avoid bending or stressing fiber cables near the transceiver and handle the optical connector caps to prevent contamination. For longer distances or single-mode fiber networks, select an appropriate transceiver type matched to the fiber and distance requirements.