Sandberg USB 3.0 Hub 4 ports

The Sandberg USB 3.0 Hub (USB Hub Sandberg 4 Ports) expands a computer’s USB connectivity by providing four USB 3.2 Gen 1 Type-A ports with data transfer rates up to 5000 Mbit/s. It connects to the host via a USB 3.2 Gen 1 Micro‑B cable (1 m included) and supports powering via USB or external DC at 5 V. The compact hub is available in black and white, compatible with Windows 10, and includes built-in overload protection for the host and hub ports.

Advantages

The hub offers four high-speed USB 3.2 Gen 1 Type-A ports for simultaneous connection of multiple peripherals, a compact and lightweight design (192 × 42 × 14 mm, 0.037 kg) for easy placement, and automatic driver installation on Windows 10. It supports both bus power (USB) and external DC power and includes overload protection to prevent damage from devices that draw excessive current.

Suitable for

• Connecting external drives, flash drives and card readers
• Attaching keyboards, mice and other low-power peripherals
• Expanding USB ports on laptops and compact desktops
• Temporary workstation setups where multiple USB devices are needed

Key specifications

• Ports: 4 × USB 3.2 Gen 1 (Type-A)
• Host interface: USB 3.2 Gen 1 (Micro‑B)
• Maximum data rate: up to 5000 Mbit/s
• Power source: USB bus-powered or external DC, output voltage 5 V
• Dimensions: 192 mm × 42 mm × 14 mm
• Weight: 0.037 kg
• Colour options: Black, White
• Included cable length: 1 m
• Compatibility: Windows 10 (automatic driver installation)

How to use

Connect the hub to your computer using the supplied USB 3.2 Gen 1 Micro‑B cable. If required by your peripheral power needs, connect an appropriate 5 V DC adapter to the hub; otherwise the hub can draw power from the host USB port. After connection, Windows 10 will install any necessary drivers automatically. Plug your USB devices into the hub’s Type-A ports and use them as you would when connected directly to the computer.

Recommendations

To avoid overload and ensure stable operation, use a powered DC adapter when connecting multiple high-current devices (external HDDs, some charging devices). Place the hub on a flat surface, and disconnect devices before unplugging the hub from the computer.