Network Card DeLOCK 62976 Ethernet 100 Mbit/s

The DeLOCK 62976 Network Card is an Ethernet-to-RS-232 converter that enables straightforward integration of RS-232 devices into a wired LAN. It provides a host RS-232 interface and supports IEEE 802.3 / 802.3u Ethernet standards with a maximum data transfer rate of 100 Mbit/s. The compact black module is designed for easy installation and central management via a Windows application that configures network interface selection, COM port settings, connection modes, password protection, device name and MAC addresses.

Advantages

This Ethernet LAN to RS-232 converter reduces latency by interacting directly with the MAC hardware address within the local network without requiring TCP/IP, avoiding the need to configure IP addresses while maintaining compatibility with current Ethernet and RS-232 standards. It supports plug-and-play integration of scanners, machines, instruments, routers and IoT devices, and allows central control and configuration through the supplied Windows software.

Suitable for

• Connecting RS-232 scanners and barcode readers to a LAN
• Integrating legacy machines and instruments into Ethernet networks
• Linking routers or IoT devices with RS-232 interfaces to a wired network
• Environments requiring low-latency serial communication over LAN

Key specifications

• Brand: DELOCK
• Model / MPN: 62976
• EAN: 4043619629763
• Interface: Ethernet (IEEE 802.3, IEEE 802.3u)
• Host interface: RS-232
• Maximum data transfer rate: 100 Mbit/s
• Connectivity technology: Wired
• Product colour: Black
• Weight: 0.067 kg

How to use

Install the DeLOCK 62976 into your wired network and connect the RS-232 device to the host interface. Run the supplied Windows application to select the network interface, configure the COM port parameters and set connection mode (manual or automatic). Optionally assign a device name and password and verify the MAC hardware address for device identification. After configuration, the converter operates in the LAN or WLAN environment to provide serial communication with reduced latency.

Recommendations

For reliable operation, place the converter on a stable wired Ethernet segment and ensure the RS-232 device uses compatible baud rate and parity settings. Use the Windows management tool to set password protection and to monitor or change COM port settings when needed.