ALLNET ALL2299 Dome IP security camera — Indoor & outdoor, 1/2.8 inch CMOS, 4.7–84.6mm (18x) optical zoom, 360° FOV, PoE, ceiling/wall mount

ALLNET ALL2299 is a dome IP security camera designed for both indoor and outdoor installations with ceiling or wall mounting. It integrates a 1/2.8" CMOS image sensor and an 18x optical zoom lens (4.7–84.6 mm) combined with up to 10x digital zoom, providing adjustable framing from wide-angle to long-range close-ups. The camera supports 30 fps video capture, a 360° field of view with tilt range −10° to 190°, Power over Ethernet (PoE) for simplified cabling, Ethernet LAN connectivity and built-in video motion detection for continuous surveillance and perimeter monitoring.

Advantages

The ALL2299 offers versatile coverage thanks to its long-range optical zoom and 360° pan/tilt range, allowing detailed monitoring across large areas without frequent repositioning. PoE support reduces installation complexity by combining power and network over a single cable. Weatherproof design and suitability for ceiling or wall mounting enable reliable outdoor deployment, while the CMOS sensor and low minimum illumination improve performance in low-light conditions. Integrated motion detection helps trigger recordings or alerts and supports efficient use of storage and network bandwidth.

Suitable for

• Perimeter and entrance monitoring for commercial buildings
• Parking lots and outdoor campus surveillance
• Warehouse aisles and loading docks requiring zoomed-in inspection
• Indoor common areas such as lobbies and corridors

Key specifications

• Image sensor: 1/2.8" CMOS
• Optical zoom: 18x (4.7–84.6 mm focal length)
• Digital zoom: up to 10x
• Frame rate: 30 fps
• Field of view (FOV): 360° pan with tilt −10° to 190°
• Minimum illumination: 0.01 lx
• Network: Ethernet LAN with Power over Ethernet (PoE) support
• Mounting: ceiling or wall
• Weather resistance: IP66-rated for outdoor use
• Color: white
• Weight: 2.3 kg

How to use

Mount the ALL2299 on a suitable ceiling or wall surface following structural and local wiring regulations. Connect the camera to the network using a CAT5e/CAT6 cable; when using PoE, the same cable provides power and data. Configure the camera via its web interface or compatible management software to set resolution, frame rate, motion detection zones and recording schedules. Use the optical zoom to frame distant subjects and adjust tilt/pan to cover required areas. Perform focus and image optimization through the camera controls before finalizing installation.

Recommendations

For reliable outdoor performance, install the camera under a protective overhang if possible and ensure connectors are sealed against moisture. Configure motion detection sensitivity and defined zones to reduce false alarms from environmental movement. Use PoE switches or injectors rated for the camera's power draw and verify network bandwidth and storage capacity for continuous 30 fps recording at the chosen resolution.