Fiber optic transceiver module BlueOptics F5-UPG-QSFP+PSM4-BO 40000 Mbit/s OSFP

The BlueOptics F5-UPG-QSFP+PSM4-BO is a fiber optic transceiver module designed for 40 Gbit/s networks. It uses an OSFP interface in a QSFP form factor and supports MPO/MTP multi-fiber connections. The module transmits and receives optical signals at 1310 nm, complies with CE, RoHS and FCC standards, and is engineered for long operational life with a reported mean time between failures of 3,000,000 hours. It is compatible with common network platforms that accept QSFP/OSFP transceivers and is intended for use in high-speed optical links using multimode fiber.

Advantages

The transceiver offers high data throughput up to 40,000 Mbit/s and an MPO/MTP connection for multi-fiber links, enabling aggregate high-bandwidth connections. Built to MSA mechanical and optical standards for QSFP modules, it uses components sourced from established suppliers to ensure stable optical performance and a long service life. Integrated digital diagnostics (DDM/DOM) provide real-time monitoring of supply voltage, laser current, transmit/receive power and temperature to support remote troubleshooting and maintenance.

Suitable for

• High-speed network uplinks between switches and routers
• Data center interconnects and server farm connectivity
• Storage area networks (SAN) and aggregation links
• Telecommunications and carrier-class optical links
• Environments requiring DOM/DDM monitoring and managed troubleshooting

Key specifications

• Interface type: OSFP form factor compatible with QSFP mechanical standard
• Maximum data transfer rate: 40,000 Mbit/s (40 Gbit/s)
• Optical wavelength: 1310 nm for transmit and receive
• Connection type: MPO/MTP multi-fiber connector
• Operating medium: Multimode fiber links
• Color / housing: Silver compact transceiver housing
• Weight: Approx. 0.04 kg
• Diagnostics: Digital Diagnostics Monitoring (DDM/DOM) compliant with SFF-8472
• Standards compliance: CE, RoHS, FCC
• Reliability: MTBF around 3,000,000 hours

How to use

Install the transceiver into a compatible OSFP/QSFP slot on the target device according to the hardware vendor instructions and ensure the host platform supports the module and, if required, DDM/DOM functionality. Connect an MPO/MTP fiber patch cable to the module and route the cable to the receiving transceiver or patch panel. Verify link status and monitor diagnostic parameters via the host management interface. Observe standard electrostatic discharge (ESD) precautions when handling the module and avoid touching the optical interfaces; keep dust caps on until final connection.

Recommendations

For optimal performance, match the transceiver to MPO/MTP patch cables and patch panels rated for 40 Gbit/s multimode links and confirm that both ends of the link use compatible optics and transceiver types. Ensure the host device firmware and driver support third-party transceivers and enable DDM/DOM if remote diagnostics are required. Maintain clean optical connectors and follow your organization’s cabling and bending-radius guidelines to preserve signal integrity.