Ernitec 0070-08214 security camera Bullet IP security camera Indoor & outdoor 2592 x 1944 pixels Ceiling/Wall/Pole

The Ernitec 0070-08214 Bullet IP security camera delivers up to 5MP (2592×1944) resolution from a 1/2.8” progressive scan CMOS sensor and a fixed 2.8mm lens, suitable for indoor and outdoor monitoring. The white, weather-resistant bullet housing is rated IP66 and supports PoE for simplified installation; mounting options include ceiling, wall or pole with 360° rotation and 0–90° tilt. Low-light performance is improved by built-in warm lights with an illumination range up to 50 m and a minimum scene illumination down to 0.003 lx. The camera includes a microSD slot, one audio in/out, one alarm in/out, built-in microphone and speaker, and wired Ethernet connectivity.

Advantages

The camera provides high-resolution 5MP imaging for detailed identification and supports wide dynamic range (WDR), 3D digital noise reduction (3D DNR), region of interest (ROI), highlight compensation (HLC), backlight compensation (BLC) and defog functions to maintain image clarity in challenging lighting and weather conditions. Intelligent analytics detect faces, humans and vehicles and enable smart events such as intrusion, single-line and double-line crossing, loitering, wrong-way detection and people counting. Power over Ethernet (PoE) simplifies cabling and installation for wired deployments.

Suitable for

• Perimeter and entrance monitoring for commercial or residential sites
• Parking areas and access roads with vehicle detection needs
• High-traffic indoor spaces for people counting and flow analysis
• Outdoor locations requiring weatherproof surveillance with long-range illumination

Key specifications

• Image sensor: 1/2.8” progressive scan CMOS
• Maximum resolution: 5MP (2592×1944) at 25/30 fps
• Lens: 2.8 mm (fixed)
• Low-light sensitivity: minimum 0.003 lx
• Illumination: built-in warm lights, up to 50 m
• Advanced image processing: WDR, 3D DNR, ROI, HLC, BLC, Defog
• Smart detection: face, human and vehicle detection; intrusion, single/double line crossing, loitering, wrong way, people counting
• Audio/alarm: 1/1 audio in/out, 1/1 alarm in/out; built-in microphone and speaker
• Storage: built-in microSD card slot
• Connectivity: wired Ethernet (PoE supported)
• Protection: IP66
• Mounting: ceiling, wall or pole; 360° rotation, tilt 0–90°
• Color: White; Weight: 1.24 kg

How to use

Install the camera using a compatible ceiling, wall or pole mount and connect it to a PoE switch or a power source and Ethernet network. Insert a compatible microSD card for local recording if required. Configure resolution and frame rate to 2592×1944 at 25/30 fps in the camera settings, enable WDR and other image-enhancement features as needed, and set up audio and alarm inputs/outputs. Use the device’s analytics settings to enable face, human and vehicle detection and to define smart event rules such as intrusion and line-crossing alerts.

Recommendations

For best results, position the camera to avoid direct facing of strong light sources and use the ROI and WDR features to improve recognition in scenes with varied brightness. When installing outdoors, ensure connectors are sealed and use PoE for reliable power and network delivery; select appropriate mounting height and angle to optimize people or vehicle detection and to achieve the stated 50 m illumination range where required.