ACT Blue 1.5 meter F/UTP CAT5E patch cable with RJ45 connectors

The ACT Blue 1.5 meter F/UTP CAT5E patch cable provides a shielded twisted-pair connection with RJ-45 connectors on both ends. At 1.5 m length and blue jacket, the cable is intended for short-distance networking between devices where reduced interference and reliable data transfer are required. Contacts are plated with 50 µin gold and the sheath is low-smoke zero-halogen (LSZH).

Advantages

The F/UTP CAT5E construction reduces electromagnetic interference for stable performance in mixed-cable environments. RJ-45 connectors on both ends enable universal compatibility with standard network ports. The 1.5 m length is practical for desk-to-switch or device-to-router connections, while the LSZH sheath limits smoke and corrosive gases in case of fire.

Suitable for

• Connecting computers, switches and routers in home or small office setups
• Desk-to-wall outlet or short patch panel links
• Temporary or permanent in-room network connections requiring a shielded CAT5E cable

Key specifications

• Cable type: F/UTP CAT5E
• Length: 1.5 m
• Connectors: RJ-45 — both ends
• Conductors: AWG 26
• Contacts: 50 µin gold
• Colour: Blue (Pantone 292C)
• Sheath: LSZH

How to use

Plug each RJ-45 connector firmly into the corresponding network ports of your devices until the latch clicks. Route the cable to avoid tight bends and sharp edges; maintain gentle curves to preserve cable performance. For best results, keep the cable separated from strong electrical sources and follow standard cabling practices when connecting to switches, routers or patch panels.

Recommendations

Use this F/UTP CAT5E patch cable for short, shielded network links up to 1.5 m and avoid running it parallel and close to high-voltage power lines to minimize interference. Inspect connectors periodically for secure fit and replace the cable if the sheath or connector is damaged.