Wireless Access Point Ruijie Networks RG-RAP2260(H) 2.4 GHz 5 GHz

The Ruijie Networks RG-RAP2260(H) Wireless Access Point provides dual-band wireless connectivity on 2.4 GHz and 5 GHz bands with support for modern Wi‑Fi standards. Designed for indoor deployment, the unit combines a compact white enclosure with eight integrated antennas and Power over Ethernet (PoE) support to simplify wiring and installation. It supports advanced security algorithms including WMM, WPA-PSK and WPA2-PSK and delivers multi-rate Ethernet LAN performance for client and uplink connections.

Advantages

The RG-RAP2260(H) offers simultaneous operation on both 2.4 GHz and 5 GHz bands and compliance with IEEE 802.11a/b/g/ax standards to support a wide range of client devices. With eight antennas and multi-rate Ethernet compatibility at 100, 1000 and 2500 Mbit/s, the access point is engineered to provide stable wireless coverage and flexible wired backhaul options. PoE capability reduces the need for separate power cabling, while built-in security algorithms help protect WLAN access and client authentication.

Suitable for

• Medium-density indoor Wi‑Fi coverage in offices and meeting rooms
• Classrooms and training facilities requiring dual-band access
• Retail and hospitality areas where discreet ceiling or wall mounting is needed
• Network environments needing multi-gig Ethernet uplinks

Key specifications

• Wireless bands: 2.4 GHz and 5 GHz
• Supported networking standards: IEEE 802.11a, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g
• Antennas: 8 integrated antennas
• Ethernet LAN ports: 2 (RJ-45)
• Ethernet LAN data rates: 100 / 1000 / 2500 Mbit/s
• Power over Ethernet (PoE) support
• Product colour: White
• Weight: 1.8 kg

How to use

Mount the RG-RAP2260(H) in the chosen indoor location on a ceiling or wall according to building and local safety codes. Connect one of the RJ-45 Ethernet ports to the network switch or router; use a PoE-enabled switch or an injector to supply power over the Ethernet cable if a local power outlet is not available. Configure the access point using the vendor’s management interface or controller, set SSIDs and security parameters (WMM, WPA-PSK, WPA2-PSK) and assign appropriate VLANs or network policies for client segregation. Verify wireless coverage and channel settings, then perform a site walk to confirm signal strength and roaming behaviour.

Recommendations

Place the access point centrally in the coverage area and avoid physical obstructions near the antennas. Use the 5 GHz band for high-throughput devices and the 2.4 GHz band for longer-range or legacy devices. For environments with many clients, enable appropriate QoS and security settings and consider using the 2500 Mbit/s Ethernet link for backbone connectivity.