TMSS GERMANY Schneider Electric XCKVR44D1H29 Limit Switch, Rotary Roller Lever, 2NC+2NO, IP65, 2m Cable

In industrial automation, position detection must be reliable even in harsh environments. The Schneider Electric XCKVR44D1H29 limit switch from the OsiSense XC Standard series provides robust end-of-travel and presence sensing for machinery, conveyors, and automated equipment. Its rotary head with thermoplastic roller lever actuates snap action contacts, delivering positive opening operation for safety circuits.

Who is it for

This limit switch is intended for machine builders, maintenance technicians, and automation engineers who need a durable, pre-cabled position switch that withstands dust, water jets, and mechanical wear. It suits packaging lines, material handling, hoists, and gate or barrier systems where reliable switching is critical.

Main features

• Rotary head with thermoplastic roller lever for versatile actuation
• Snap action contact block with 2 NC + 2 NO contacts
• Rugged Zamak (metal) body for industrial durability
• Pre-cabled with 2 m cable and M20 x 1.5 cable gland
• IP65 protection against dust and water jets
• Electrical insulation Class II per IEC 60536
• Operating speed up to 1.5 m/s
• Mechanical durability: 10,000,000 cycles

Specifications

• Product Type: Limit Switch
• Series: OsiSense XC Standard
• Actuator Type: Rotary Head with Thermoplastic Roller Lever
• Contact Configuration: 2 NC + 2 NO (Snap Action)
• Body Material: Zamak (Metal)
• Cable Type: Pre-cabled
• Cable Length: 2 m
• Cable Entry: 1 x M20 x 1.5 cable gland
• Operating Speed: 1.5 m/s
• IP Protection Rating: IP65
• Electrical Insulation Class: Class II IEC 60536
• Rated Insulation Voltage (Ui): 500 V (IEC 60947-1)
• Rated Impulse Withstand Voltage (Uimp): 6 kV
• Operating Temperature Range: -25 to 70 °C
• Mechanical Durability: 10,000,000 cycles
• Electrical Durability: 5,000,000 cycles
• Mounting Type: Body Fixing (2 x M5 screws)
• Standards: IEC 60947-5-1, EN 60947-5-1, UL 508, CSA C22.2 No 14

Tips

Mount the switch on a flat surface using two M5 screws. Adjust the roller lever to suit the actuation angle and ensure the operating speed does not exceed 1.5 m/s for reliable contact operation.