TENDA Surveillance Sensor Camera TC3B24C(6MM) 2.56MP 2560x1440 30fps 6mm fixed lens WDR IR 30m PoE-like 12V DC Wall/Ceiling White

TENDA TC3B24C(6MM) is a wired sensor surveillance camera designed for wall or ceiling installation. It provides 2.56 MP (2560×1440) resolution at 30 fps with a 6 mm fixed focal length lens. The camera supports H.264 and H.265+ video compression, digital wide dynamic range (DWDR/WDR), day/night mode with IR illumination up to 30 m, ONVIF compatibility and IVS human detection. It is powered from a 12 V DC power source (1 A) and includes mounting accessories, an AC adapter and a quick start guide.

Advantages

The camera delivers high-resolution 2.56 MP video at 30 fps and supports efficient H.265+ compression for reduced bandwidth and storage usage. Built-in WDR/DWDR and day/night functionality with IR up to 30 m improve image clarity in varying light conditions. ONVIF compatibility and wired Ethernet connectivity simplify integration with third-party NVRs and recording systems. Compact, weather-ready design and included mounting kit enable wall or ceiling installation outdoors.

Suitable for

• Outdoor perimeter monitoring of homes and small businesses
• Entrance and driveway surveillance
• Monitoring of yards, parking areas and building facades

Key specifications

• Sensor: 1 × CMOS, progressive scan
• Maximum resolution: 2560 × 1440 pixels at 30 fps
• Lens: 6 mm fixed focal length, aperture f/1.6; horizontal angle ≈79.1°, vertical ≈43.3°, diagonal ≈94.9°
• Night vision: IR illumination up to 30 m
• Image enhancement: WDR/DWDR, day/night mode, IR cut-off filter
• Video formats: H.264, H.265+; video streaming supported
• Connectivity: Wired Ethernet (10 Mbps), ONVIF compatible; 1 × RJ-45 port
• Power: 12 V DC, 1 A (AC adapter included)
• Placement: Outdoor, wall or ceiling mount
• Built-in features: Motion detection, IVS human detection, built-in microphone (mono)
• Operating conditions: -40 to 60 °C; relative humidity 10–95%
• Dimensions and weight: 80 × 80 × 76 mm (H × W × D), 307 g
• Certifications: UKCA

How to use

Mount the camera on a suitable wall or ceiling using the included drilling template, screws and mounting accessories. Connect the camera to a wired Ethernet network using the RJ-45 port and provide 12 V DC power (1 A) using the supplied AC adapter. Configure video settings, compression format (H.264/H.265+), WDR and IVS human detection via the camera’s web interface or compatible NVR/management software (ONVIF). Position the camera to cover the desired area, adjust pan/tilt within the mechanical ranges, and verify night vision performance at distances up to 30 m.

Recommendations

For reliable outdoor operation, install the camera under an overhang or protected location if possible, ensure network and power connections are weatherproofed, and test motion/IVS settings to reduce false alerts. Follow local electronic waste disposal regulations when discarding the product.