SATA Cable Male/Male 0.7m DeLOCK 82813 Yellow

The Delock SATA cable with a length of 0.7 m provides a reliable internal connection between SATA devices and complies with the SATA III specification supporting data transfer rates up to 6 Gb/s. It features male-to-male connectors and metal clips for additional snap-in retention; the interface is backwards compatible with earlier SATA versions, with transfer speeds limited to the respective older standard. The cable is yellow in colour and suitable for connecting HDDs, SSDs, controller cards or other SATA peripherals inside a PC.

Advantages

The cable supports SATA 6 Gb/s for high-speed data transfer and offers downward compatibility with previous SATA generations. Metal clips on the connectors provide improved retention to prevent accidental disconnection. With a 0.7 m length, the cable is suitable for typical internal routing inside standard PC cases and the yellow colour helps with cable identification.

Suitable for

• Connecting internal HDDs and SSDs
• Connecting SATA controller cards to storage devices
• Replacing or routing internal SATA cables in desktop PCs

Key specifications

• Manufacturer: DELOCK
• Model / MPN: 82813
• EAN: 4043619828135
• Type: SATA cable, male to male
• Cable length: 0.7 m
• Colour: Yellow
• Interface: SATA III (6 Gb/s), backwards compatible with earlier SATA versions

How to use

Locate the SATA ports on the motherboard or controller card and on the storage device. Align each male connector with the corresponding SATA receptacle and press until the metal clip snaps into place to secure the connection. Ensure the cable is routed to avoid sharp bends and to maintain airflow inside the case. When removing, depress the metal clip and pull the connector straight out to avoid damaging the port.

Recommendations

Use this SATA cable for internal device connections only. Avoid excessive bending or kinking of the cable and keep it away from high-temperature components. For best performance, ensure both connected devices support the desired SATA transfer rate; otherwise the connection will operate at the lower supported speed.