Rope Eurolite 58010490 1m Zinc Steel 1050kg

The EUROLITE lifting rope (model 58010490) is a 1 m zinc-plated steel rope with a diameter of 1 cm and a manufacturer-stated maximum load of 1050 kg. It is designed and manufactured to meet European and German standards for lifting and safety bonds where loads are carried above persons, and it is suitable for use as attachment gear when correctly selected and installed.

Advantages

The rope is zinc-plated for corrosion resistance and tested by an independent accredited institute (LGA). It is produced according to DIN EN 12385-4 and DIN 56927 and complies with requirements summarized in BGI 810-3:2007-03 for loads above persons. The product includes a documented breaking-load test report in the format required by German regulations (DIN EN 10204).

Suitable for

Key specifications

How to use

Install the rope as part of a certified suspension or attachment system following local regulations and the applicable standards. For lifting or securing loads above persons, select the correct rope and calculate using a safety factor of 12 as required for BGV C1/BGI 810-3 situations. Ensure the rope is connected to compatible end fittings and hardware rated for the intended load and inspected before each use.

Recommendations

Always verify the WLL (working load limit) stamped on the rope and use the rope only within the limits derived from the required safety factor. Do not use the rope if damaged, corroded, or if the test documentation is not available. Follow local safety regulations for lifting above persons and keep records of inspections and test certificates.