QUADRIOS 1905CA056 Heat Shrink Tubing for Battery Packs, Transparent, 19 mm, 1 m, 2:1, No Adhesive

Heat shrink tubing for battery packs with a 19 mm inner diameter, transparent colour, and 2:1 shrink ratio. Made from polyolefin without adhesive lining, it provides electrical insulation and mechanical protection for LiPo, NiMH, and NiCd batteries.

Advantages

Transparent tubing allows visual inspection of the battery pack after shrinking. The 2:1 shrink ratio ensures a tight fit over irregular shapes. Polyolefin material offers good chemical and UV resistance, and the tubing remains flexible across a wide temperature range from -55°C to +125°C.

Suitable for

• Battery pack assembly and repair
• Cable insulation and bundling
• Component protection against abrasion and moisture

Key specifications

• Material: Polyolefin
• Shrink ratio: 2:1
• Inner diameter before shrinking: 19 mm
• Inner diameter after shrinking: 9.5 mm
• Wall thickness after shrinking: 0.45 mm
• Length: 1 m
• Colour: Transparent
• Adhesive lining: No
• Minimum shrink temperature: 70°C
• Full shrink temperature: 110°C
• Operating temperature range: -55°C to +125°C
• Dielectric strength: 15 kV/mm
• Flammability rating: VW-1
• UV resistance: Good
• Chemical resistance: Good

Recommendations

Use a heat gun set to 110°C for uniform shrinking. Ensure the tubing is centred over the battery pack before applying heat.