Power/conductor cable EUROLITE P-Con 3×1.5 mm², length 5 m (model 30247708)

EUROLITE P-Con 3×1.5 mm² is a 5 m power/conductor cable designed for reliable electrical connections in lighting and audio installations. The cable has three flexible cores with a cross-section of 1.5 mm² each, providing a standard conductor size for distributing mains power and routing control or low-voltage signals in temporary rigging and fixed installations.

Advantages

The cable combines flexibility and mechanical robustness suitable for repeated handling during setup and tear-down. Its three-core configuration simplifies connections where live, neutral and earth conductors are required, while the 1.5 mm² cross-section balances current-carrying capacity with manageable diameter and weight. The 5 m length offers moderate reach without excess cable bulk, making it convenient for stage, studio and venue use.

Suitable for

Key specifications

How to use

Strip the outer jacket carefully to expose the three insulated conductors and prepare the ends according to the termination method required by your equipment or connectors. Ensure secure mechanical and electrical connections by using appropriate connectors, terminal blocks or cable glands rated for the intended current and environmental conditions. Route the cable to avoid sharp bends, pinch points and heat sources, and secure it with tape, ties or clamps as needed for a tidy and safe installation.

Recommendations

Verify the current requirements of connected devices and observe local wiring regulations; do not exceed the current-carrying capacity typical for 1.5 mm² conductors. For outdoor or high-wear applications, consider additional protection such as conduit or protective sleeving. Regularly inspect the cable for damage and replace it if the outer jacket or conductor insulation is compromised.