Perforator Makita HR2670 800W 2.1J 26mm SDS Plus

The Makita HR2670 800W 2.1J 26mm SDS Plus perforator is a corded rotary hammer designed for drilling and light chiseling in concrete, masonry and similar construction materials. It delivers 800 watts of input power and nominal impact energy around 2.1 joules, with an SDS Plus tool holder supporting drills up to 26 mm diameter. The tool is intended for continuous use on building sites and renovation projects where reliable percussion performance and compatibility with SDS Plus bits are required.

Advantages

The rotary hammer combines a robust 800W motor with a 2.1J impact mechanism to provide stable drilling progress in reinforced concrete and brick. The SDS Plus chuck allows fast bit changes and broad accessory compatibility. Compact design and balanced weight distribution improve handling during extended tasks. Materials and construction focus on durability for professional and serious DIY use.

Suitable for

• Drilling holes up to 26 mm in concrete and masonry
• Installing anchors, dowels and electrical boxes in walls
• Light chiseling and removal of plaster or tile adhesive
• General renovation and construction drilling tasks

Key specifications

• Input power: 800 W
• Impact energy: 2.1 J (nominal)
• Maximum drilling diameter in concrete: 26 mm
• Chuck type: SDS Plus
• Functions: drilling and hammer drilling with light chiseling capability

How to use

Fit an SDS Plus drill bit appropriate for the hole diameter and material, ensuring the bit seats fully in the chuck. Select the hammer drilling mode for concrete and masonry; switch to rotary-only mode if drilling into wood or metal with suitable bits. Hold the tool with both hands, align the bit perpendicular to the work surface, and apply steady, moderate pressure—do not force the bit. Allow the hammer action and motor speed to do the work. After use, remove the bit, clean the chuck area, and store the tool in a dry place.

Recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. Select SDS Plus bits rated for concrete for best results, and consider using a depth stop for consistent hole depths. For extended drilling sessions, allow intermittent cooling periods to preserve motor life.