PCIe RGB cable Lian Li Strimer Wireless, 2x 8‑pin connectors, 0.34 m, black/transparent, silicone/TPE

As LIAN LI’s patented exclusive product, the Strimer Wireless is an upgraded RGB extension cable that brings wireless control and a redesigned light guide to PC builds. The kit uses a 2.4GHz L-Wireless controller that connects to the motherboard and communicates wirelessly with the receiver built into the Strimer, while power is supplied directly through the extension cable. The extended light guides cover both sides of the cable to reduce visible dead zones and conceal the extension wires for a cleaner, continuous lighting effect. Available variants include motherboard 24‑pin, CPU 2×8‑pin, GPU 2×8‑pin and GPU 12V‑2×6 (12+4‑pin with a 90° male connector on the GPU version).

Advantages

Wireless 2.4GHz control eliminates the need for additional signal wiring and simplifies installation. Powering the LED strips directly from the extension cable reduces cable clutter and removes the separate power connection previously required. The extended light guides provide broader side coverage and minimize dark zones for more consistent lighting. The GPU 12+4‑pin model uses a reversible 90° angled connector to improve clearance with large graphics cards and accommodate different case layouts. Included switchable clip colors and spare plastic clips (one spare for the 24‑pin version) help adapt the Strimer to various system builds.

Key specifications

• L-Wireless 2.4GHz sync supported (controller required)
• Addressable RGB extension cables
• Available variants: motherboard 24‑pin, CPU 2×8‑pin, GPU 2×8‑pin, GPU 12V‑2×6 (12+4‑pin with 90° connector)
• Power LED strips directly from the extension cable (no separate LED power cable required)
• Simultaneous transmission: up to 10 channels
• Length: 0.34 m
• Connector example: 2×8 pin (other variants included)
• Materials: Silicone, Thermoplastic elastomer (TPE)
• Colors: Black, Transparent
• Package contents: 1 pc(s) (includes L-Wireless controller and accessories as applicable)

How to use

Install the L-Wireless controller to the motherboard according to the manual, connect the Strimer extension to the target power connector (24‑pin, 2×8‑pin or GPU connector variant) and align the receiver orientation as needed. If using the GPU 12+4‑pin version, choose the desired orientation for the 90° male connector and flip if necessary to fit the GPU and case layout. Use the included plastic clips to secure bent sections of the Strimer and the interchangeable clip to match system color theme. After physical installation, power on the PC and pair the Strimer with the L-Wireless controller over 2.4GHz to enable wireless control of the RGB effects.

Recommendations

Use L-Connect 3 software for full customization, including per-light‑guide control and themed presets. Ensure the receiver on the Strimer has a clear 2.4GHz path to the L-Wireless controller for reliable communication, and follow the manual when switching the pre-installed clip or repositioning the protective shell on the 24‑pin male end.