PC case Fractal Design Meshify 2 Compact RGB White — ATX/microATX/Mini-ITX, supports 3x120 mm front + 1x120 mm rear, 2.5 inch/3.5 inch drives

The Fractal Design Meshify 2 Compact RGB in white is a mid-tower PC case designed for balanced airflow, flexible component compatibility and compact build layouts. It ships with four Aspect 12 RGB PWM front fans pre-installed and supports ATX, micro ATX and Mini-ITX motherboards. The case offers a removable front nylon filter, full PSU shroud with removable cover and a bolt-free tempered glass side panel for a clean interior and unobstructed access.

Advantages

The case provides refined airflow through a repositioned front fan mounting and an open interior layout that creates a direct intake-to-exhaust path. It includes easy-to-clean high-airflow nylon filters on the front, top and base plus a detachable front filter with an angular mesh design. Four pre-installed Aspect 12 RGB PWM fans and a built-in RGB controller on the front/top I/O with the Fractal Northern Lights effect deliver integrated lighting control while a front USB 3.1 Gen 2 Type-C port offers up to 10 Gbps transfer speeds and fast charging support.

Suitable for

• Compact ATX, micro ATX or Mini-ITX gaming builds requiring RGB lighting
• Systems prioritizing airflow and dust filtration in a smaller footprint
• Custom water-cooling or air-cooling setups with multiple fan/radiator configurations

Key specifications

• Exterior colour: White
• Supported motherboards: ATX, micro ATX, Mini-ITX
• Pre-installed fans: 4× 120 mm Aspect 12 RGB PWM (front) + 1× 120 mm (rear)
• Fan support: Up to 7× 120 mm or 4× 140 mm
• Radiator support: Top up to 240 mm (with GPU up to 360 mm), front up to 360/280 mm
• Maximum GPU length: Up to 360 mm (varies with radiator configuration; GPUs under 305 mm for certain front/top combos)
• Drive bays: Support for two 2.5"/3.5" drives plus up to four SSDs (two SSD brackets included)
• Expansion slots: 7 bridgeless slots
• I/O: 3× front USB ports including 1× USB 3.1 Gen 2 Type-C (up to 10 Gbps) and built-in RGB controller
• Dimensions (W×D×H): 210 × 424 × 475 mm

How to use

Install the motherboard (ATX, micro ATX or Mini-ITX) and route power and data cables under the full-length PSU shroud to keep the main chamber clear. Use the removable top panel and top fan bracket to access the interior when fitting radiators, fans or routing cables. Mount drives in the removable drive cage or on the included SSD brackets, and attach GPUs up to the supported length depending on your radiator placement. Connect the front I/O including the USB Type-C and RGB controller to the motherboard headers for full functionality.

Recommendations

For optimal airflow and noise balance, use the included four Aspect 12 RGB PWM fans as intake at the front and retain a single rear exhaust. Remove the front nylon filter temporarily when performing heavy dust cleaning, and replace it after maintenance. When installing large front radiators, verify GPU clearance against the specified maximum lengths.