Microconnect B-FTP602W networking cable White 2 m Cat6 F/UTP (FTP)

The MicroConnect B-FTP602W RJ-45 Cat6 2m is a 2‑meter network patch cable designed for connecting switches, modems, routers and wall outlets or patch panels. Built to Cat6 standard and tested up to 250 MHz, this white cable provides a reliable physical link for small office, home network and entertainment setups. The cable features F/UTP (B‑FTP) shielding and latch protection on the RJ‑45 plugs to reduce connector damage during tight installations and to minimize electromagnetic interference (EMI) that can cause crosstalk and transmission errors.

Advantages

This Cat6 cable supports high data rates (up to 10000 Mbit/s as per product data) and is backwards compatible with Cat5e and Cat5 systems. F/UTP shielding reduces EMI and crosstalk for more stable signal transmission, while RJ‑45 latch protection helps prevent connector breakage during installation in confined spaces. The 2 m length and white color suit typical desk-to-equipment and visible routing installations.

Suitable for

• Connecting routers, switches and modems to patch panels or wall outlets
• Small office and home network connections
• Streaming and entertainment systems needing stable wired connections
• Environments where reduced EMI is required

Key specifications

• Standard: Cat6, tested up to 250 MHz
• Shielding: F/UTP (B‑FTP)
• Connectors: RJ‑45 to RJ‑45 with latch protection
• Length: 2 m
• Max data rate (product data): up to 10000 Mbit/s
• Color: White
• Compatible with: Cat5e and Cat5

How to use

Plug one RJ‑45 connector into your network device (router, switch or modem) and the other into the destination port — patch panel, keystone jack or wall outlet. Ensure connectors click into place via the latch. Route the cable to avoid sharp bends and keep it separated from strong sources of electromagnetic noise where possible. For rack or panel installations, guide the cable gently through available spaces to prevent strain on the plugs.

Recommendations

For best performance, use this shielded Cat6 cable where EMI or crosstalk might affect signal integrity; avoid running it parallel and close to power lines or unshielded electrical equipment. Verify connector seating and test links after installation to confirm expected data rates and reliability.