LevelOne HUBBLE Varifocal IP Network Camera, 3-Megapixel, 802.3af PoE, IR LEDs, Vandalproof, two-way audio, Indoor/Outdoor

The LevelOne HUBBLE Varifocal 3-Megapixel IP security camera (model FCS-5057, EAN 4015867190142) is a wired PoE surveillance camera designed for indoor and outdoor monitoring. It provides 3-megapixel resolution and a manual varifocal lens with a focal length range of 2.8–12 mm, delivering a horizontal viewing angle of approximately 70.5°. The unit includes IR LEDs for night vision, supports two-way audio, and comes in a vandalproof, silver housing suitable for wall mounting. With a minimum illumination of 0.1 lx and a frame rate up to 30 fps, this camera is intended for continuous security monitoring where reliable wired connectivity and Power over Ethernet are required.

Advantages

The LevelOne HUBBLE Varifocal camera combines higher-resolution imaging with a flexible manual focus lens to adapt framing to different scenes. PoE power simplifies installation by using a single Ethernet cable for both data and power, while the vandalproof housing increases resilience in exposed locations. Built-in IR LEDs extend monitoring capability into low-light and night conditions, and two-way audio enables basic interaction or audible monitoring when connected to compatible systems.

Suitable for

• Perimeter and entrance surveillance for small to medium commercial properties
• Outdoor monitoring of parking areas, loading zones, and building exteriors
• Indoor common areas such as lobbies, corridors, and storage rooms
• Sites requiring wired, reliable connectivity with PoE power

Key specifications

• Resolution: 3 Megapixels
• Lens: Manual varifocal 2.8–12 mm
• Minimum illumination: 0.1 lx
• Night vision: IR LEDs included
• Frame rate: up to 30 fps
• Connectivity: Wired Ethernet (PoE supported)
• Audio: Two-way audio support
• Placement: Indoor and outdoor, vandalproof housing
• Mounting: Wall mount
• Product colour: Silver
• Weight: 0.955 kg

How to use

Mount the camera on a suitable wall surface using appropriate anchors and screws for the substrate. Connect the camera to your network switch or PoE injector using a standard Ethernet cable to provide both power and data. Adjust the manual focus and varifocal lens (2.8–12 mm) to achieve the desired field of view and focus on the area of interest. Configure network settings, user access, and recording options through the LevelOne HUBBLE management interface or compatible NVR/software following the manufacturer's setup instructions. Test night vision performance and audio channels after installation to confirm proper operation.

Recommendations

For reliable long-term performance, mount the camera under an overhang or use additional weather protection if it will be exposed to direct precipitation. Use a PoE-capable switch or midspan injector that meets the camera's power requirements, and ensure the network provides sufficient bandwidth for 3-Megapixel video at 30 fps. Periodically clean the lens and check mount fittings; if the scene or monitoring requirements change, readjust the varifocal lens and focus accordingly.