LED strip EUROLITE 50530138 5 m 5050 RGB 24 V — flexible lighting tape

EUROLITE 50530138 is a 5-metre flexible LED strip using 5050 RGB LEDs designed for 24 V systems. The tape provides multicolour lighting that can be adjusted through a compatible external RGB controller (controller not included). It is intended for accent, decorative and ambient lighting in residential, retail and event environments. The strip can be cut at marked segments to achieve custom lengths and is mounted on clean, dry surfaces.

Advantages

The LED strip offers uniform colour mixing from 5050 RGB LED packages and a continuous 5 m length for extended runs without visible breaks. Operating at 24 V makes it suitable for low-voltage installations while reducing voltage drop compared with lower-voltage strips over similar lengths. The flexible tape is easy to route around corners and can be trimmed at marked cutting points for tailored installations. Installation requires only a compatible 24 V power supply and an external RGB controller for colour control.

Suitable for

Key specifications

How to use

Measure the run and cut the strip only at the printed cut marks to achieve the required length. Attach the tape to a clean, dry surface using the adhesive backing or an appropriate mounting method. Connect the strip to a compatible 24 V DC power supply and wire the RGB leads to a suitable external controller (controller not included). Verify polarity and secure connections before applying power. For runs that exceed the recommended length for your power supply or controller, provide additional power injection points to maintain even brightness.

Recommendations

Use a dedicated 24 V DC power supply sized for the total strip length and current draw, and select an RGB controller compatible with 5050 LED strips. Ensure the installation surface is clean and dry for reliable adhesion, and avoid prolonged exposure to moisture unless additional protection is applied. Observe the marked cutting positions and follow electrical safety practices when connecting the strip to power and control equipment.