IP Bullet Camera Hikvision Pro Series ColorVu 4 MP Motorized Varifocal 2.8–12 mm, 1/1.8 inch CMOS, Wired, Indoor/Outdoor, White

The IP Bullet Camera Hikvision Pro Series ColorVu 4 MP Motorized Varifocal 2.8–12 mm is a wired indoor/outdoor surveillance camera designed to deliver continuous color imaging and detailed video day and night. It uses a 1/1.8" CMOS sensor to produce 4 MP (2688 x 1520) resolution and a motorized 2.8–12 mm varifocal lens that provides a horizontal viewing angle from 114.6° (wide) to 41.8° (tele). The camera supports advanced imaging functions including scene-adaptive WDR and HikAI-ISP noise reduction, and it integrates Smart Hybrid Light technology combining infrared and white supplementary lighting for improved low-light performance and extended detection ranges.

Advantages

This model provides continuous color imaging in low light with ColorVu technology and flexible framing through a motorized varifocal lens. Built-in audio capability supports two-way communication and onboard arrayed dual microphones for higher-quality sound capture. Deep-learning features enable person and vehicle classification for more relevant alerts, while Smart Hybrid Light, active strobe and audio alarm functions offer deterrence options. The camera is built for harsh environments with corrosion-resistant materials, IP67 dust/water protection and IK10 vandal resistance for reliable outdoor use.

Suitable for

• Perimeter and outdoor area surveillance where color detail is important
• Parking lots and vehicle access points requiring person and vehicle classification
• Commercial and industrial entrances needing vandal- and weather-resistant cameras
• Indoor spaces that benefit from two-way audio and continuous color at low light

Key specifications

• Image sensor: 1/1.8" CMOS, 4 MP (2688 x 1520)
• Lens: Motorized varifocal 2.8–12 mm
• Horizontal viewing angle: 114.6° (wide) to 41.8° (tele)
• Low-light technology: ColorVu with Smart Hybrid Light (IR and white light)
• Night/detection range: up to 61.5 m (wide) and up to 151.7 m (tele) with supplemental lighting
• Image processing: HikAI-ISP noise reduction and scene-adaptive WDR
• Intelligent functions: Person and vehicle classification based on deep learning
• Audio: Built-in arrayed dual-microphone and two-way audio support
• Connectivity: Wired Ethernet LAN
• Protection: IP67 (water and dust resistant), IK10 (vandal resistant), corrosion resistant construction
• Mounting: Wall or pole mount with full 360° rotation capability
• Color and weight: White housing, approximately 1.55 kg

How to use

Install the camera on a stable wall or pole using the supplied mounting hardware and adjust the motorized varifocal lens via the camera interface or supported client software to set the desired focal length and framing. Connect the camera to a wired Ethernet network for power and data as required, configure image settings such as WDR and noise reduction to match the scene, and enable ColorVu and Smart Hybrid Light modes to maintain color imaging in low light. Activate person and vehicle classification in the deviceʼs analytics settings to reduce irrelevant alerts and configure two-way audio and alarm outputs as needed.

Recommendations

For best performance, position the camera to minimize direct exposure to strong light sources and adjust supplemental lighting modes based on the specific scene. Use the motorized lens to fine-tune the field of view during installation, and enable scene-adaptive WDR and HikAI-ISP for clearer details in challenging lighting. Regularly check mounting hardware and housing seals to maintain IP67 and corrosion-resistant performance in outdoor installations.