INNE OPTICUM UNICABLE SCR/2LEGACY ROBUST 4UB Converter

Modern satellite distribution often struggles to feed multiple tuners from a single coaxial cable, especially when legacy receivers are part of the setup. The INNE OPTICUM UNICABLE SCR/2LEGACY ROBUST 4UB converter solves this by combining four Unicable user bands with two legacy outputs, enabling one dish to serve up to four Unicable-compatible tuners and two traditional receivers simultaneously.

Who is it for

This converter is ideal for residential and small commercial installations where a mix of old and new satellite receivers must share a single dish. It suits technicians and advanced users upgrading multi-dwelling units, hotels, or homes with multiple set-top boxes without running additional cables.

Main features

• Four Unicable user bands (1210, 1420, 1680, 2040 MHz) for independent channel selection on up to four SCR-compatible tuners.
• Two legacy outputs for standard universal LNB receivers, preserving compatibility with older equipment.
• Wide input frequency range: 10.7–11.7 GHz (low band) and 11.7–12.75 GHz (high band).
• Low noise figure of 0.1 dB typical, ensuring clear signal reception even in fringe areas.
• High conversion gain (55–65 dB) compensates for cable losses in long runs.
• Supports DiSEqC 1.0/2.0 for legacy control and EN50494 for Unicable commands.
• Robust build with 40 mm feedhorn and F-type connectors for reliable outdoor use.

Specifications

• LNB type: Unicable SCR with legacy outputs
• Unicable user bands: 4 (UB1 1210 MHz, UB2 1420 MHz, UB3 1680 MHz, UB4 2040 MHz)
• Legacy outputs: 2
• Input frequency range: 10.7–11.7 GHz (low band), 11.7–12.75 GHz (high band)
• LO frequency: 9.75 GHz (low band), 10.6 GHz (high band)
• Output frequency range: 950–2150 MHz
• Noise figure: 0.1 dB (typical)
• Conversion gain: 55–65 dB
• Cross polarization isolation: >20 dB
• Control protocols: DiSEqC 1.0/2.0, EN50494
• Feedhorn diameter: 40 mm
• Connector type: F-type (female)
• Power consumption: max 200 mA
• Operating temperature: -30°C to +60°C
• Polarization: linear (vertical/horizontal)

Tips

Ensure the dish is aligned correctly and use high-quality coaxial cable to minimize signal loss. For best results, configure Unicable user bands in your receivers according to the assigned frequencies. The two legacy outputs can be used for older receivers or signal meters without affecting Unicable performance.