GEMBIRD ABS 1.75 mm 1 kg filament — White, compatible with any brand

GEMBIRD ABS 1.75 mm 1 kg filament in white is a general-purpose thermoplastic filament designed for FDM/FFF 3D printing. The filament is supplied on a 1 kg spool with a nominal diameter of 1.75 mm and is formulated from acrylonitrile butadiene styrene (ABS) to provide standard ABS strength, toughness and heat resistance. It is compatible with printers from any brand and suitable for a wide range of functional parts including housings, fixtures and prototypes.

Advantages

This ABS filament is engineered for higher-speed extrusion with improved melt characteristics that support fast printing modes on modern high-speed printers. It delivers high strength and good toughness while maintaining relatively low density, which reduces weight for larger prints. The product is supplied in white, offering a neutral base for painting or post-processing and is suitable for printers with heated build chambers and CoreXY motion systems. Compatibility with automatic material systems and common consumer and prosumer models ensures straightforward use across brands.

Suitable for

Key specifications

How to use

Install the filament on the printer spool holder and feed it into the extruder according to your printer manufacturer instructions. Use a heated bed and enclosure where possible to reduce warping; typical ABS print settings begin with nozzle temperatures in the range recommended for ABS by your printer (consult slicer profiles) and print speeds that take advantage of the filament's improved melt flow. Calibrate extrusion and first-layer height before starting production prints. Allow parts to cool slowly in an enclosure or use active but controlled cooling to avoid excessive shrinkage.

Recommendations

For reliable results, print ABS on machines with heated beds and, when available, a chamber temperature control. Use adhesion aids such as ABS slurry, PEI or appropriate adhesives on the build plate. When printing at high speed, verify cooling and retraction settings in your slicer to prevent stringing and ensure dimensional accuracy. Post-process with common ABS techniques: sanding, acetone smoothing (with caution and proper ventilation), and painting.