FO Jumper Cable ROLINE 50/125µm OM4 LC/LC Low-Loss 15m

The ROLINE FO Jumper Cable 50/125µm OM4 LC/LC Low-Loss 15m is a multimode fiber patch cable designed for high-bandwidth connections in data centers, server rooms and campus networks. With OM4 fiber and low-loss LC connectors, the cable provides low insertion loss and supports 10 Gb/s Ethernet, Fibre Channel and OIF applications to distances up to 550 meters in suitable installations. The cable jacket and connector assembly follow ROLINE quality standards and come in purple jacket color for easy identification.

Advantages

OM4 multimode fiber delivers increased modal bandwidth (4700 MHz·km) for reliable high-speed transmission. Low-loss LC connectors reduce typical insertion loss compared with standard LC connectors (approximately 0.15 dB vs. 0.5 dB), improving link margin. Duplex 50/125µm construction and professional assembly ensure consistent performance and durability for backbone and patching applications.

Suitable for

• 10 Gb/s Ethernet links within data centers and enterprise networks
• Fibre Channel interconnects for storage networks
• Building backbone and medium-length campus backbone connections (up to 550 m where applicable)
• Patch and cross-connect panels in server rooms and telecom racks

Key specifications

• Fiber type: Multimode 50/125 µm, OM4
• Connectors: LC to LC, low-loss
• Length: 15 m
• Modal bandwidth: 4700 MHz·km
• Typical insertion loss (low-loss LC): ~0.15 dB (typical) vs standard LC ~0.5 dB
• Color: Purple
• Brand / MPN: ROLINE / 21.15.8859
• EAN: 7611990110841

How to use

Inspect connectors and fiber ends for dirt before installation and clean if necessary. Route the duplex cable through cable management and secure to avoid sharp bends (respect minimum bend radius specified by the manufacturer). Insert LC connectors into the corresponding LC ports on devices or patch panels until they click. Verify optical link performance using appropriate test equipment after connection.

Recommendations

For best performance, use low-loss LC connectors with properly cleaned end faces, avoid tight bends and strain, and verify insertion loss and return loss with an optical power meter or OTDR after installation.