Fibre optic cable LANBERG FO-LULU-SD11-0010-YE, 3 m, G.657.A1, LC–LC, yellow

LANBERG FO-LULU-SD11-0010-YE is a 3 m single-mode (SM) fibre optic patch cable with G.657.A1 bend-insensitive fibre. The cable features LC connectors on both ends (LC–LC) with UPC polishing, a 9/125 µm fibre diameter and a 3.0 mm duplex LSZH jacket in yellow. It is designed for indoor installations and equipment interconnects where low insertion loss and good return loss are required.

Advantages

The cable provides low insertion loss (< 0.25 dB) and high return loss (> 50 dB) thanks to UPC-polished LC connectors and single-mode G.657.A1 fibre. Its LSZH outer jacket reduces smoke and toxic emissions in the event of fire, while the 3.0 mm duplex construction ensures reliable alignment and easy handling. Bend-insensitive fibre and a minimum bend radius of 10 mm improve performance in confined routing spaces.

Suitable for

• Indoor fibre backbone and horizontal cabling
• Equipment-to-equipment interconnects (switches, transceivers, patch panels)
• High-speed optical links including InfiniBand
• Installations requiring tight bends and limited routing space

Key specifications

• Connector type: LC–LC
• Polishing standard: UPC
• Fiber standard: G.657.A1 (bend-insensitive)
• Fiber type: Single-mode (SM), 9/125 µm
• Cable construction: Duplex
• Cable diameter: 3.0 mm
• Jacket: LSZH (yellow)
• Insertion loss: < 0.25 dB
• Return loss: > 50 dB
• Operating temperature: -40 to 85 °C
• Minimum bend radius: 10 mm
• Cable length: 3 m

How to use

Route the LANBERG LC–LC patch cable between compatible LC ports on transceivers, switches or patch panels. Ensure connectors are clean before insertion to maintain low insertion loss; use dust caps during storage. Avoid sharp bends and secure the cable to prevent strain near connector ends. Verify link operation after installation with appropriate optical test equipment.

Recommendations

Use this 3 m G.657.A1 LC–LC LSZH patch cable for indoor high-speed links and equipment interconnects; keep connectors clean and respect the minimum bend radius (10 mm) to maintain specified optical performance.