Fiber optic transceiver BlueOptics 02313FCC-BO 25000 Mbit/s SFP28

The BlueOptics 02313FCC-BO is an SFP28 fiber optic transceiver designed for 25 Gbit/s networks and backward-compatible 10 Gbit/s links. It uses an 850 nm VCSEL laser for multimode fiber and an LC duplex connector. The module supports link lengths up to 100 m on appropriate multimode fiber and is supplied in a compact silver metal housing with a lightweight design of approximately 20 g. The transceiver is compliant with CE, FCC and RoHS standards and includes digital diagnostics monitoring (DDM/DOM) compatible with MSA SFF-8472 for real-time monitoring of transmit and receive parameters.

Advantages

The module delivers high-speed 25 Gbit/s optical transmission while maintaining compatibility with common 10 Gbit/s equipment and MSA-compliant SFP28 ports. Built to MSA standards and populated with high-quality optical and electronic components, it provides long MTBF (around 3,000,000 hours) and reduced maintenance needs. Integrated DDM/DOM enables remote monitoring of voltage, temperature and optical power, supporting easier troubleshooting and network maintenance.

Suitable for

• High-density data center uplinks and server interconnects
• Switch-to-switch and switch-to-router multimode fiber links up to 100 m
• Storage area networks (SAN) and high-performance computing clusters
• Replacement or upgrade of compatible SFP28/10GBASE-SR modules in networking equipment

Key specifications

• Maximum data rate: 25000 Mbit/s (25 Gbit/s), backward-compatible with 10 Gbit/s
• Wavelength: 850 nm (multimode VCSEL)
• Maximum link distance: up to 100 m on OM3/OM4 multimode fiber (depending on fiber and equipment)
• Connector type: LC duplex
• Digital diagnostics: DDM/DOM compliant with MSA SFF-8472
• Operating environment: standard commercial temperature range (check host device specs)
• Housing: compact metal transceiver, colour: silver; weight: ~20 g

How to use

Insert the BlueOptics SFP28 transceiver into a compatible SFP28 or SFP+ port until it clicks into place, observing ESD precautions. Connect an LC duplex multimode patch cable between transceivers or to a patch panel, ensuring correct polarity for transmit and receive pairs. Verify that the host device recognizes the module and, if required, enable DDM/DOM in the management interface to monitor optical parameters. For best performance, use appropriate OM3/OM4 multimode fiber and maintain clean connector end-faces.

Recommendations

Use this transceiver with equipment that supports MSA-compliant SFP28 modules and confirm host compatibility with 25G/10G SR optics. Regularly inspect and clean fiber connectors, monitor DDM parameters for early detection of link degradation, and choose suitable multimode fiber (OM3/OM4) to achieve the specified range and signal quality.