Ethernet Cable ProXtend CAT6A RJ-45 2m Red

The ProXtend CAT6A U/UTP CU LSZH Ethernet Cable (2 m, red) is a high-performance network cable designed for 10GBase-T connections and fast data transfer up to 10000 Mbit/s. Constructed with 99.9% pure copper conductors (AWG 24) and U/UTP cabling, it supports PoE+ and is suitable for professional and home networking where reduced interference and reliable transmission are required.

Advantages

The cable features a Low Smoke Zero Halogen (LSZH) outer jacket for reduced smoke and toxic emissions in case of fire, 99.9% pure copper strands for improved conductivity, and 50µ gold-plated RJ-45 connectors for enhanced durability and stable signal transmission. Strain relief and a snagless latch protector increase mechanical durability during installation and daily use. U/UTP shielding helps minimize crosstalk and external interference.

Suitable for

• 10GBase-T networking between switches, routers, and servers
• PoE+ powered devices such as IP cameras, access points, and VoIP phones
• Structured cabling runs in offices, data closets, and home networks
• Connections requiring visible cable colour coding or short patch leads

Key specifications

• Length: 2 m
• Connectors: RJ-45 to RJ-45
• Cabling technology: CAT6A U/UTP (10GBase-T)
• Conductor: 99.9% pure copper strands, AWG 24
• Outer jacket: LSZH (Low Smoke Zero Halogen)
• Connector plating: 50µ gold
• Supports: PoE+
• Colour: Red
• Weight: 0.085 kg

How to use

Connect the RJ-45 plug to the network device ports (switch, router, network card or PoE injector) ensuring a firm click from the latch protector. Route the cable avoiding sharp bends and heavy compression to maintain signal integrity; the built-in strain relief reduces stress at the connector. For patching in racks or wall outlets, use appropriate cable management (ties, trays or channels) and keep cable lengths within recommended distances for optimal 10G performance.

Recommendations

For best long-term performance, avoid running the cable alongside high-voltage power lines and maintain bend radii greater than the cable diameter. Use the red colour to mark specific circuits or device groups in your installation. Verify PoE+ device compatibility before use and replace damaged connectors or severely kinked sections to prevent signal loss.