ESUN eABS+HS Filament 1.75mm Green 1kg – High-Speed ABS+ for FDM 3D Printers

For makers who refuse to slow down, the ESUN eABS+HS in Green rethinks what an ABS-based filament can do. While standard ABS often warps and demands slow, careful printing, this high-speed variant combines the impact strength of ABS+ with a formulation tuned for print speeds up to 300 mm/s. The result is a filament that keeps pace with modern CoreXY and high-flow hotends without sacrificing layer adhesion or surface quality.

Highlights

• High-speed ABS+ blend: print reliably at 50–300 mm/s, far beyond typical ABS limits
• Low warping and shrinkage: engineered for easier printing on open-frame or enclosed printers
• Excellent impact resistance and toughness for functional parts
• Consistent 1.75 mm diameter with ±0.03 mm tolerance for smooth extrusion
• Vacuum-sealed with desiccant to protect filament quality during storage

In daily use

Load the eABS+HS and set your hotend between 230–270 °C with a heated bed at 80–100 °C. The filament flows evenly, producing strong, dimensionally stable parts with a smooth surface finish. Its low warping tendency means less time fighting adhesion issues and more time printing prototypes, brackets, or enclosures. The green colour is vibrant and consistent across spools, making it easy to match parts or create visually striking prints.

Full specifications

• Material: eABS+ (Acrylonitrile Butadiene Styrene Plus)
• Diameter: 1.75 mm (±0.03 mm)
• Net weight: 1 kg
• Print temperature: 230–270 °C
• Heated bed temperature: 80–100 °C
• Recommended print speed: 50–300 mm/s
• Density: 1.04 g/cm³
• Tensile strength: 40–60 MPa
• Elongation at break: 15–30%
• Melt Flow Index: 10–15 g/10min (220 °C, 10 kg)
• Spool material: plastic
• Packaging: vacuum sealed with desiccant
• Compatibility: FDM 3D printers

Final note

If you want ABS-like durability without the usual print-speed penalty, the ESUN eABS+HS Green is a practical choice for high-throughput workshops and ambitious hobbyists alike.