CLUB3D HDMI + Micro USB to DisplayPort™ 4K120Hz or 8K30Hz M/F Active Adapter

The Club 3D CAC-1335 is an active adapter that converts an HDMI source plus power via Micro USB into a DisplayPort signal, enabling connection to DisplayPort displays that support up to 8K at 30 Hz or 4K at 120 Hz. The adapter is intended for use when the source device does not natively support DisplayPort 8K30Hz or 4K120Hz output; the source must still support the target resolution and refresh rate over HDMI. A 1 m USB Type-A to Micro USB cable (M/M) is included for powering the adapter (5 V / 1.5 A).

Advantages

The active design allows conversion from HDMI to DisplayPort while drawing power through the Micro USB input, ensuring compatibility with high-resolution displays up to 8K30Hz or 4K120Hz where the HDMI source supports these modes. The adapter is compact and includes the required power cable in the box, simplifying setup and avoiding the need to source a separate cable.

Suitable for

• Connecting an HDMI-equipped PC, laptop or media player to a DisplayPort monitor or TV
• Using a DisplayPort display that supports 4K@120Hz from an HDMI output
• Using a DisplayPort display that supports 8K@30Hz from an HDMI output

Key specifications

• Model: CLUB3D CAC-1335
• Input connectors: HDMI + Micro USB (power)
• Output connector: DisplayPort
• Supported resolutions: up to 8K at 30 Hz or 4K at 120 Hz (requires source HDMI to support the resolution)
• Power: Micro USB 5 V / 1.5 A (USB Type-A to Micro USB cable 1 m included)
• Cable length (power): 1 m

How to use

Connect the HDMI output of your source device to the adapter's HDMI input. Plug the included USB Type-A to Micro USB cable into a USB power source and the adapter's Micro USB port to provide the required 5 V / 1.5 A power. Connect the adapter's DisplayPort output to your DisplayPort monitor or TV using a DisplayPort cable. Configure the display settings on the source device to the desired resolution and refresh rate (for example 4K@120Hz or 8K@30Hz) if supported by the source and display.

Recommendations

Ensure your HDMI source device supports the target resolution and refresh rate over HDMI before use. Use a high-quality DisplayPort cable and a USB power supply capable of providing 5 V / 1.5 A. If the display does not show the expected resolution, check source output settings and cable integrity.