Access Point Cisco Meraki CW9162I 2.4 GHz 5 GHz 6 GHz Wi-Fi 6

The Cisco Meraki CW9162I is a tri‑band Wi‑Fi 6E access point supporting 2.4 GHz, 5 GHz and 6 GHz bands with a combined aggregate frame rate of up to ~3.9 Gbps. It includes three 2x2 radios for client service plus a dedicated scanning radio and an integrated Bluetooth Low Energy radio. The CW9162I can be managed on‑premises with Catalyst 9800 controllers or cloud‑managed via the Meraki dashboard, allowing migration between modes without additional hardware. Built for high‑density enterprise environments, it supports advanced security standards including WPA3 and 192‑bit encryption and offers integrated tools for RF optimization, application‑aware traffic shaping, and location analytics.

Advantages

The access point delivers higher throughput, increased capacity and reduced device interference by using the expanded 6 GHz band together with 5 GHz and 2.4 GHz. Automated cloud‑based RF optimization uses data from the dedicated scanning radio to tune channels, transmit power, and client connection settings. Integrated enterprise security and guest isolation simplify secure deployments while Meraki cloud management provides unified monitoring, automated optimization, and scalable policy deployment across many sites. The built‑in Bluetooth Low Energy radio and Meraki analytics enable location‑aware applications and advanced client visibility.

Suitable for

• High‑density office and campus environments
• Retail and public venues requiring secure guest access and PCI reporting
• Organizations using cloud or on‑premises network management with potential future migration
• Sites requiring location services, Bluetooth device visibility, and IoT integrations

Key specifications

• Wireless bands: 2.4 GHz, 5 GHz, 6 GHz (Wi‑Fi 6E)
• Aggregate tri‑radio frame rate: ~3.9 Gbps
• Radios: three 2x2 client radios + dedicated scanning/security radio + BLE radio
• Networking standards: IEEE 802.11a/b/g/n/ac/ax
• Ethernet LAN: 1 × RJ‑45 (supports 100 / 1000 / 2500 Mbps)
• Security: WPA3 support, 192‑bit encryption, 802.1X and Active Directory integration
• Weight: 0.93 kg
• Colour: White

How to use

Install the access point in a suitable ceiling or wall location and connect to power and the network via the RJ‑45 port. If using Meraki cloud management, the CW9162I will automatically connect to the Meraki cloud, download its configuration, and join the assigned network. Administrators can set SSIDs, security policies, QoS rules, and schedule firmware upgrades through the Meraki dashboard. For on‑premises management, register the AP with a Catalyst 9800 Wireless LAN Controller and configure via the controller interface.

Recommendations

Place access points to provide even coverage in high‑density areas, avoid physical obstructions and sources of RF interference, and use the Meraki dashboard’s RF optimization and site planning tools. For optimal performance in mixed device environments, enable MU‑MIMO and OFDMA features and apply application‑aware traffic shaping to prioritise mission‑critical traffic.