3D printing material Creality 3D 3301010305 PLA White 1 kg 1.75 mm

Creality 3D 3301010305 PLA White 1 kg 1.75 mm is a white Polylactic Acid (PLA) filament designed for desktop FDM 3D printers. The filament has a nominal diameter of 1.75 mm and comes on a 1 kg spool, offering a balanced combination of dimensional stability and printability. PLA is derived from renewable resources and is widely used for prototypes, models and functional parts where ease of printing and surface finish are important.

Advantages

This PLA filament provides consistent diameter tolerance and reliable feeding on compatible Creality 3D printers and other machines supporting 1.75 mm filament. White color delivers neutral, paintable surfaces and good layer definition. The material prints at moderate temperatures, exhibits low warping on typical print beds, and requires minimal drying under normal storage conditions.

Key specifications

• Material: Polylactic Acid (PLA)
• Colour: White
• Spool weight: 1 kg
• Filament diameter: 1.75 mm (nominal)
• Compatibility: FDM/FFF printers supporting 1.75 mm filament
• Recommended print behaviour: low warping, good layer adhesion

How to use

Load the 1.75 mm PLA filament into a compatible Creality 3D or other FDM printer following the printer manufacturer's filament loading procedure. Set the nozzle temperature according to your printer and slicer recommendations for PLA (commonly 190–220 °C) and use a heated bed if required for adhesion (typically up to 60 °C). Adjust print speed, retraction and cooling settings in the slicer to match part geometry and surface quality requirements.

Recommendations

Store the spool in a dry environment away from direct sunlight and humidity. For best results, use common PLA slicer profiles as a baseline and fine-tune printing parameters for your specific printer and model complexity. Post-processing such as light sanding, priming and painting is effective on white PLA surfaces.