3D printer filament Polmask PLA 1.75 mm Lavender Purple, 1 kg spool

Polmask PLA 1.75 mm Lavender Purple, 1 kg spool is a polylactic acid (PLA) filament designed for FDM/FFF 3D printers that accept 1.75 mm filament. The filament offers consistent diameter and a lavender purple colour suitable for prototypes, decorative objects and small functional parts where easy printing and dimensional stability are important. The 1 kg spool provides a substantial supply for multiple prints and small production runs, while the PLA material enables low-warp printing on common heated or unheated build surfaces.

Advantages

This PLA filament delivers reliable layer adhesion and good surface finish with standard printing temperatures typical for PLA. Its 1.75 mm diameter ensures compatibility with a wide range of desktop 3D printers and extruders. The lavender purple pigment is evenly distributed to produce consistent colour across long prints. Because PLA is a bio-based thermoplastic, it emits relatively low odour during printing and is dimensionally stable for small to medium-sized models.

Suitable for

• Rapid prototyping of concept models and mock-ups
• Decorative items such as figurines, ornaments and display pieces
• Small functional parts that do not require high heat resistance
• Educational and hobbyist 3D printing projects

Key specifications

• Material: Polylactic acid (PLA)
• Diameter: 1.75 mm nominal
• Net weight on spool: 1 kg
• Colour: Lavender purple
• Recommended print temperature range: typical for PLA (manufacturer settings may vary)

How to use

Load the 1.75 mm filament into a compatible FDM/FFF 3D printer following the printer manufacturer's instructions. Use standard PLA print settings as a starting point: set nozzle temperature according to your printer and spool label guidance, and adjust bed temperature and first-layer settings for good adhesion. Monitor the first layers to confirm extrusion quality and dimensional accuracy, and fine-tune retraction, print speed and cooling to optimise surface finish and reduce stringing.

Recommendations

Store the spool in a dry environment or sealed container with desiccant to preserve filament quality. For best results on larger prints, ensure adequate part cooling and consider using a heated bed or adhesive surface if needed to prevent lifting. Avoid exposing finished PLA parts to continuous high temperatures above typical glass transition range.