Wall plate GIRA E2 Aluminium screwless thermoplastic 80.8×80.8×9.3 mm

GIRA E2 aluminium-coloured wall plate made of thermoplastic with a screwless design. Dimensions: 80.8 × 80.8 × 9.3 mm. The cover is intended for flush-mounted installation to protect and conceal switches and sockets while providing a minimalist aluminium-coloured finish. For dry rooms the GIRA E2 range is IP20 rated; certain switches, push buttons and socket outlets with hinged covers can be used in humid rooms with IP44 protection when installed with the appropriate sealing sets.

Advantages

The thermoplastic material offers a lightweight, durable cover that resists everyday wear. The screwless design creates a clean, modern appearance and simplifies cleaning. Compatible with the GIRA E2 system dimensions, the plate provides a precise fit and protects internal wiring. IP20 rating for standard flush-mounted dry-room installations and the option to achieve IP44 water protection for specific devices with sealing sets increases installation flexibility.

Suitable for

Key specifications

How to use

Fit the wall plate over the installed GIRA E2 flush-mounted frame and the mounted insert (switch or socket) until it snaps into place, ensuring a flush and even alignment. For standard dry-room installations, use the plate as supplied. If an IP44 water-protected installation is required, install compatible hinged-cover devices and apply the manufacturer’s sealing set according to the sealing set instructions before attaching the wall plate. Verify alignment and secure the surrounding frame as recommended by the device installation guide.

Recommendations

Use the GIRA E2 aluminium screwless wall plate in dry indoor environments for standard installations. For humid locations, only combine this plate with GIRA E2 switches, push buttons or socket outlets designed for IP44 protection and install the specified sealing sets; follow the manufacturer’s installation instructions to maintain the intended protection rating.