Telephone cable ShiverPeaks 70125-20 TAE (N) to Western plug, 1.8–2.0 m cable length unknown

ShiverPeaks 70125-20 is a telephone patch cable with a TAE (N) connector on one end and a Western (RJ) plug on the other. It is designed to bridge legacy German TAE sockets and modern devices that use Western/RJ telephone interfaces, allowing direct connection without separate adapters when wiring compatibility is required. Typical applications include connecting telephones, fax machines and analogue modems where a reliable point-to-point cable between TAE and Western connectors is needed.

Advantages

The cable combines a TAE (N) plug and a Western (RJ) plug to provide compatibility between different telephone connector standards. Its construction is intended for straightforward plug-and-play use, reducing the need for separate adapter boxes. The single-cable solution simplifies installations in offices and homes where devices with Western plugs must be connected to TAE sockets.

Suitable for

• Connecting desktop telephones to TAE wall sockets
• Linking fax machines with Western/RJ interfaces to TAE outlets
• Connecting analogue modems or telephony devices that require a Western plug

Key specifications

• Connector A: TAE (N) plug
• Connector B: Western (RJ) plug
• Cable type: telephone patch cable for analogue voice/data
• Brand: ShiverPeaks

How to use

Insert the TAE (N) plug into a compatible TAE wall socket and the Western (RJ) plug into the device’s telephone port. Ensure both connectors are fully seated to establish a reliable connection. No special configuration or power is required; the cable carries standard analogue telephone signals between the two connector types. If line problems occur, check that contacts are clean and cables are not damaged.

Recommendations

Use the cable indoors in normal environmental conditions and avoid tight bends or kinks near the connectors. For best performance, check compatibility of the telephone device with analogue POTS lines and ensure that the TAE socket wiring corresponds to the device’s required pins.