SSD disk ADATA 1.92 TB 2.5 inch PCI Express 3.0 QLC 3D NAND ASU630SS-1T92Q-R

The ADATA SU630 1.92 TB 2.5" SSD (ASU630SS-1T92Q-R) is a SATA 2.5-inch solid-state drive that uses QLC 3D NAND Flash to provide high capacity at an affordable price. With a compact 2.5" form factor and PCI Express 3.0 compatibility through the controller/firmware design, it delivers up to 520 MB/s sequential read and 450 MB/s sequential write speeds (SATA III interface, up to 6 Gbit/s) and is intended as an HDD-to-SSD upgrade for desktops and laptops, serving as either a storage or boot drive.

Advantages

The SU630 combines high-capacity QLC 3D NAND with dynamic SLC caching to improve sustained performance while keeping cost per gigabyte low. LDPC ECC technology increases data integrity and helps extend drive lifespan. As an SSD, it has no mechanical parts, making it more resistant to shock and vibration, quieter in operation, and lower in power consumption compared with traditional HDDs.

Suitable for

• Upgrading a laptop or desktop HDD to an SSD
• Primary boot drive for faster system startup
• High-capacity secondary storage for files, media and backups

Key specifications

• Model: ASU630SS-1T92Q-R
• Capacity: 1.92 TB (1920 GB)
• Form factor: 2.5" SATA
• Sequential read speed: up to 520 MB/s
• Sequential write speed: up to 450 MB/s
• Interface throughput: up to 6 Gbit/s (SATA III)
• Weight: 0.0475 kg
• Flash type: QLC 3D NAND
• Error correction: LDPC ECC

How to use

Install the SU630 into a 2.5" drive bay in your desktop or use a compatible 2.5" mounting solution or adapter for laptops. Connect the drive to a SATA III (6 Gbit/s) port using a SATA data cable and attach power via the standard SATA power connector. If replacing an existing HDD, use the ADATA Migration Utility to clone the operating system and data to the SU630, or perform a fresh OS installation. After installation, you can monitor drive health and firmware with ADATA SSD Toolbox.

Recommendations

For best results, connect the drive to a SATA III port to achieve the stated read/write speeds, enable AHCI mode in BIOS for optimal compatibility, and periodically back up important data. Use the ADATA Migration Utility when cloning from an HDD to preserve the existing system setup.