Soap Dispenser TESA Smooz 0.2 L Silver White

The Tesa Smooz soap dispenser (0.2 L) combines a high-gloss chrome finish with satined glass and a silver-white colour scheme to provide a compact, stylish soap source for bathrooms and kitchens. The rounded dispenser measures 70 mm (W) × 126 mm (D) × 170 mm (H), holds 0.2 litres of liquid soap and is easy to refill and maintain. It is mounted using an adhesive adapter that eliminates the need for drilling and protects walls and tiles.

Advantages

The adhesive mounting system allows flexible placement without drilling, keeping surfaces intact. The dispenser’s design mixes high-gloss chrome with satined glass for a modern look, and its 0.2 L capacity is suitable for regular household use. It can be removed without leaving marks and reused in a new location with a replacement adapter (BK20). Adhesive reaches full strength after a 12-hour drying period.

Suitable for

• Bathrooms in homes and apartments
• Kitchen sinks and dishwashing areas
• Guest washrooms and powder rooms
• Locations where wall drilling is not allowed or desirable

Key specifications

• Brand: Tesa
• Model / MPN: 40323-00000-00
• EAN: 4042448448415
• Capacity: 0.2 L
• Dimensions (W × D × H): 70 × 126 × 170 mm
• Colour / finish: Silver white with high-gloss chrome and satined glass
• Mounting: Adhesive adapter (no drilling); adapter BK20 required for re-use
• Adhesive curing time: 12 hours for full strength

How to use

Clean and dry the chosen wall surface, apply the adhesive adapter according to the supplied instructions and press the dispenser into place. Allow the adhesive to cure for 12 hours before first use to reach full strength. Refill the dispenser by removing the top or designated refill opening and pouring in liquid soap up to the recommended level. For relocation, carefully remove the dispenser; to reuse it in another location, fit a new BK20 adapter.

Recommendations

Do not apply on rough, uneven or porous surfaces; ensure the surface is free of dust, grease and moisture before mounting. Allow the full 12-hour curing time for maximum adhesion and avoid heavy loads on the dispenser during this period.