Smart plug Shelly Wave Plug S Z-Wave 800 — smart outlet, Z-Wave 800, 230V, 12A, power & energy measurement

Shelly Wave Plug S is a compact indoor smart plug with Z-Wave 800 Series wireless connectivity. It supports 230 V AC and up to 12 A (maximum input power 2500 W), provides power and energy measurement, SmartStart and Over the Air updates, and uses AES-128 security. The device is designed for integration with popular home automation hubs and protects connected equipment against overheating, overload and overvoltage.

Advantages

The plug combines Z-Wave 800 connectivity with low power consumption and compact dimensions for easy installation in indoor sockets. Integrated power and energy measurement enables monitoring of connected devices. SmartStart simplifies inclusion into a Z-Wave network, OTA updates keep firmware current, and built-in safety protections reduce risk to appliances. LED indicators provide clear status feedback.

Suitable for

• Remote switching of household appliances (lamps, fans, chargers)
• Energy monitoring and basic consumption tracking
• Integration with Home Assistant, Fibaro, SmartThings, Homey and similar hubs
• Automation scenes and scheduled control within Z-Wave networks

Key specifications

• Wireless technology: Z-Wave 800 Series, 868.4 MHz
• AC input voltage: 230 V, 50 Hz
• Maximum current: 12 A
• Maximum input power: 2500 W
• Power consumption (typical): 0.7 W
• Rated impulse-withstand voltage: 2500 V
• Maximum indoor range: 40 m
• Operating temperature: -20 to 40 °C
• Dimensions (W×D×H): 44 × 44 × 70 mm
• Weight: 60 g
• Security: AES-128
• LED indicators: Yes
• Protection: against overheating, overload and overvoltage
• Maximum RF transmit power (band): < 25 mW
• Power plug compatibility: fits common European CEE 7 plug types (Schuko/Type F and Type C compatibility noted)

How to use

Plug the Shelly Wave Plug S into a compatible indoor socket and connect the appliance to the plug. Include the device into your Z-Wave network following your hub’s inclusion procedure; SmartStart can simplify this step if supported. After inclusion, use your home automation hub or the device endpoints to switch the outlet, read power and energy measurements, and configure automation rules. Ensure the connected load does not exceed 12 A or 2500 W and observe the specified operating temperature range.

Recommendations

For safe and reliable operation, install the plug in indoor, dry locations and avoid loads above the rated current and power. Use with compatible Z-Wave hubs for full feature access, keep firmware updated via OTA when available, and allow space around the plug for ventilation to reduce overheating risk.