SATA cable DeLOCK 85345 0.3 m

This SATA cable by DeLOCK (model 85345) is 0.3 m long and has two SATA 7-pin connectors for internal connections between SATA devices such as HDDs, SSDs, controller cards or flash modules. It complies with the latest SATA standard and supports data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions (operating at their respective speeds). The cable is designed so that when connected to a hard drive the cable is routed downwards, and metal clips on the connectors secure a reliable click-fit connection.

Advantages

The 0.3 m DeLOCK SATA cable provides a standardized SATA 7-pin interface for stable internal data connections. Support for up to 6 Gb/s enables high-speed transfers with SATA III devices, and metal locking clips prevent accidental disconnection. Backwards compatibility ensures it works with older SATA devices at their native speeds.

Suitable for

• Connecting internal hard disk drives (HDD) to motherboard or controller
• Connecting solid state drives (SSD) with SATA interface
• Linking SATA controller cards to storage devices
• Internal wiring of small form factor or standard PC cases where a 0.3 m cable is sufficient

Key specifications

• Brand: DELOCK
• Model / MPN: 85345
• EAN: 4043619853458
• Cable length: 0.3 m
• Connectors: SATA 7-pin to SATA 7-pin
• Data transfer rate: up to 6 Gb/s (SATA III), backwards compatible with earlier SATA versions

How to use

Connect one SATA 7-pin connector to the SATA port on the motherboard or controller card and the other to the SATA device (HDD, SSD or similar). Ensure the metal clips on the connectors engage with the device ports until you hear or feel a click. Route the cable as needed inside the PC case; when plugging into a hard drive the cable is intended to be led downward. Power the system after securing connections and verify device recognition in BIOS/UEFI or the operating system.

Recommendations

Use this cable for internal SATA connections where a short 0.3 m length is adequate. Avoid bending the cable sharply near the connectors and do not stress the locking clips. For maximum performance, pair with SATA III devices and compatible motherboard/controller ports.