Raise3D Premium PETG Filament 1.75 mm 1 kg Red PMRA-1007-003

PETG is a popular choice for 3D printing when you need parts that are stronger than PLA but easier to print than ABS. Raise3D Premium PETG combines high strength, low warping, and good chemical resistance, making it suitable for functional prototypes, mechanical parts, and end-use components. This red filament comes on a 1 kg spool with a diameter of 1.75 mm and a tight tolerance of ±0.02 mm for consistent extrusion.

Who is it for

This filament is ideal for makers, engineers, and hobbyists who need durable parts with a glossy finish. It works well for tool holders, enclosures, and parts exposed to moderate heat or chemicals. The low odor and low warping make it user-friendly even on open-frame printers.

Main features

• Material: PETG (Polyethylene Terephthalate Glycol)
• Diameter: 1.75 mm with ±0.02 mm tolerance
• Weight: 1 kg spool
• Color: Red
• Low warping and good layer adhesion
• High strength and chemical resistance
• Glossy surface finish

Specifications

• Recommended nozzle temperature: 230-250 °C
• Recommended bed temperature: 70-90 °C
• Density: 1.27 g/cm³
• Tensile strength: 45-55 MPa
• Elongation at break: 150-200%
• Heat deflection temperature (HDT): ~70 °C
• Shore hardness: D75-D80
• Recommended print speed: 40-80 mm/s
• Spool type: Standard universal spool
• Packaging: Vacuum sealed with desiccant
• Compatibility: FDM 3D printers
• Odor: Low
• Moisture absorption: Moderate

Tips

Store PETG in a dry box or resealable bag with desiccant when not in use, as it absorbs moisture over time. For best results, use a heated bed at 70-90 °C and print on a surface like PEI or BuildTak. If you experience stringing, reduce the nozzle temperature slightly or increase retraction.