Power cable set 1 m 35 mm² for IVT SWD series inverter 2000 W

Power cable set 1 m 35 mm² for IVT SWD series inverter 2000 W is a dedicated connection cable intended for use with IVT SWD 2000 W inverters. The set contains one meter of 35 mm² cross-section power cable designed for DC and AC connections between batteries, inverters and distribution components. The cable is sized to carry the currents typical for small off-grid systems and backup power installations and is suitable for short-distance installations where solid, low-resistance connections are required.

Advantages

The 35 mm² conductor cross-section provides low voltage drop and reliable current capacity for the rated inverter power. The one-meter length allows flexible placement of the inverter relative to batteries or distribution blocks without excess cable clutter. The cable construction is suitable for standard inverter terminals and ensures stable mechanical and electrical contact when properly terminated. Using a correctly sized cable reduces heating and energy losses compared with undersized wiring.

Suitable for

Key specifications

How to use

Strip the cable ends to the required length and apply appropriate lugs or ring terminals compatible with the inverter and battery terminals. Ensure terminals are clean and free of corrosion before assembling. Mount the cable so it follows the shortest practical route with secure fastening to avoid movement or chafing. Tighten terminal connections to the torque recommended by the inverter manufacturer and verify polarity before energizing the system. After installation, inspect connections for heat buildup during initial operation.

Recommendations

Use the cable only for the intended inverter and battery connections. Verify conductor size and length against the installation’s current requirements and local electrical regulations. If longer runs or different environmental conditions are required, select cables and terminations rated for those conditions and consult a qualified installer when in doubt.