Power cable PSSO POWERCON 5m H07RN-F 3G1.5 – mains lead with PowerCON connector, 5 m length, H07RN-F rubber, 3×1.5 mm²

PSSO POWERCON mains lead, 5 m long and fitted with a PowerCON locking connector, is engineered for reliable AC power distribution to professional audio, lighting and stage equipment. The H07RN-F rubber sheath and three 1.5 mm² conductors (3G1.5) provide a flexible, durable connection that resists mechanical stress and outdoor working environments. The integrated PowerCON connector ensures a secure, lockable mating for temporary installations, touring rigs and rental equipment where vibration and movement may occur.

Advantages

The H07RN-F rubber insulation delivers enhanced flexibility and abrasion resistance compared with standard PVC cables, allowing the cable to be routed and coiled repeatedly without damage. A 5 metre length balances reach and manageability for stage layouts and FOH positions. The PowerCON locking connector provides positive locking and reliable contact, preventing accidental disconnection during operation. The 3×1.5 mm² conductor configuration supports stable AC supply for many common professional devices while keeping the cable diameter compact and easy to handle.

Suitable for

Key specifications

How to use

Inspect the cable and connector for visible damage before each use. Connect the PowerCON locking connector to the corresponding PowerCON inlet on the device and twist or lock the connector according to the connector's locking mechanism to ensure a secure fit. Route the cable to avoid trip hazards, pinching or sharp edges and secure with appropriate cable management accessories. For disconnection, unlock or twist the PowerCON connector before pulling the cable free. Follow local electrical safety rules and switch off mains power when connecting or disconnecting under load if the device or connector type does not support hot-plugging.

Recommendations

Use the cable for temporary and semi-permanent installations; avoid permanent burial or continuous outdoor exposure. Do not exceed the current capacity of 1.5 mm² conductors as defined by local electrical regulations and the connected equipment's requirements. Store the cable coiled without tight bends and inspect periodically for wear, replacing it if the insulation, conductors or connector show damage.