Power adapter/inverter mean well SFTN02M-15 — 2 W, input 10.8–13.2 V, output 15 V, RoHS, depth 15.2 mm

MEAN WELL SFTN02M-15 is a compact DC-DC converter designed for PCB mounting. It accepts a nominal input range of 10.8–13.2 V DC and delivers a regulated single output of 15 V DC at up to 0.133 A (2 W). The module comes in an SMD package with a shallow depth of 15.2 mm and is RoHS compliant, making it suitable for space-constrained electronic and embedded applications.

Advantages

The SFTN02M-15 offers a small footprint and low profile due to its SMD package and 15.2 mm depth, enabling integration into compact assemblies. It provides a regulated 15 V output from a 10.8–13.2 V input, supports short-circuit protection with approximately 0.5 second response, and complies with RoHS requirements. Its 2 W power rating fits low-power industrial control circuits and small electronic systems.

Suitable for

• Embedded systems and single-board computers requiring a 15 V rail
• Small electronic devices and sensor modules
• Industrial control circuits and low-power automation modules

Key specifications

• Brand: mean well
• Model (MPN): SFTN02M-15
• Input voltage: 10.8–13.2 V DC
• Output voltage: 15 V DC
• Output current: 0.133 A (maximum)
• Output power: 2 W
• Protection: short protection (~0.5 second)
• Package: SMD, PCB mount
• Depth: 15.2 mm
• Compliance: RoHS
• Pack quantity: 3840 pcs
• EAN: 4021087052023

How to use

Mount the SFTN02M-15 on the PCB according to the manufacturer’s SMD footprint and soldering guidelines. Connect the input to a stable 10.8–13.2 V DC source with correct polarity. Route the 15 V output to the target circuits ensuring the load does not exceed 0.133 A. Observe proper PCB layout practices for thermal dissipation and decoupling. If a short-circuit occurs, the module implements a short protection mechanism that typically responds within 0.5 second; clear the fault and verify the load before reapplying power.

Recommendations

Use the SFTN02M-15 in applications where space is limited and power requirements do not exceed 2 W. Ensure adequate board-level cooling and follow MEAN WELL’s footprint and soldering recommendations. Verify input voltage range and polarity before connection, and avoid continuous operation at maximum rated current to extend service life.