PoE adapter Trendnet TI-IG60

The TRENDnet TI-IG60 PoE adapter is an industrial-grade, IP30 rated Gigabit PoE+ injector designed to add power to non‑PoE switches and extend networked PoE devices up to 100 meters (328 ft.) over a single Ethernet cable. It supports Fast and Gigabit Ethernet data rates (10/100/1000 Mbit/s) and is compliant with IEEE 802.3af and 802.3at standards. The compact adapter (104 x 82 x 32 mm, 132 g) offers a 60 W power budget and can deliver power to PoE, PoE+, high-power PoE+ devices and devices requiring up to 60 W, with a maximum device power draw of 36 W for high-power PoE+ modes when applicable.

Advantages

The TI-IG60 provides a hardened design for industrial environments with dual redundant DC inputs (power supply sold separately, TI-S12048) and overload current protection for reliable operation. It supports both PoE and PoE+ standards while maintaining Gigabit data throughput, and includes DIN-rail and wall-mount hardware for flexible installation. Its small size and low weight simplify placement in constrained spaces.

Suitable for

• Powering IP cameras, access points or VoIP phones from a non‑PoE Gigabit switch
• Industrial network deployments requiring IP30-rated components
• Remote or compact installations where DIN-rail or wall mounting is needed

Key specifications

• Model: TRENDnet TI-IG60
• Standards: IEEE 802.3af, IEEE 802.3at
• Data rates: 10/100/1000 Mbit/s
• Power budget: 60 W (maximum device delivery: up to 60 W; typical high-power PoE+ mode 36 W)
• Maximum power consumption: 72 W
• Input voltage: 48–56 V DC
• Ports: 2 x RJ-45 (Ethernet LAN)
• Ingress protection rating: IP30
• Dimensions: 104 x 82 x 32 mm
• Weight: 0.132 kg
• Color: Black
• Mounting: DIN-rail and wall mount included
• Manufacturer part number (MPN): TI-IG60
• EAN: 0710931160444

How to use

Connect the TI-IG60 to a non‑PoE Gigabit switch using the Ethernet input port, supply DC power to the unit via the DC input(s) (use the compatible TI-S12048 power supply, sold separately, or another appropriate 48–56 V DC source), and run an Ethernet cable from the PoE output port to the PoE device up to 100 meters away. Verify the powered device supports the supplied PoE class (802.3af/at) and monitor the adapter for power and link status. Use the redundant power inputs to connect two DC sources for increased uptime if required.

Recommendations

For reliable long-term operation in industrial settings, use a regulated 48–56 V DC power supply, ensure proper wiring and grounding, and observe the 100 m Ethernet distance limit. Select cabling and PoE devices compatible with IEEE 802.3af/at and account for the unit's 60 W power budget and 72 W maximum consumption when planning connected device power draws.